My database stores time in GMT.. but my application stores time in CST..
I need to convert them from GMT to CST considering DAYLIGHT TIME SAVING as well by using Sql query..
How can I convert a DATE to EPOCH time taking care of daylight savings?
I tried with this code but there is a difference of 36000 seconds. eg:Sysdate_To_Epoch('04-Sep-2012') gives 1346716800 whereas it should give 1346680800.
CREATE OR REPLACE FUNCTION Sysdate_To_Epoch(v_date IN DATE)
RETURN NUMBER
IS
[Code]....
I am trying to get the number of seconds between March 3 2010 and march 31 2010 in Oracle. I am in Eastern time in the US. Everything I try just keeps coming up with 30 days * 86400 seconds per day = 2592000. 1 hour was lost when we switched to daylight savings time so the correct answer is 2588400.
How do a create a function in Oracle that will give me the number of seconds between 2 dates or timestamps that is aware of the loss of an hour in March and the gain of an hour in November?
During the daylight savings time our scheduler jobs are running either an hour before/after depending upon the time switch.
I went through the Oracle documentation and found below suggestions which I have already tried in vain.
Document says scheduler first picks the timezone from the start date of the job if provided so i tried setting the start date using the TO_TIMESTAMP_TZ('2012/01/22 18:50:00 US/Eastern','yyyy/mm/dd hh24:mi:ss tzr') which did not fix the problem. I have noticed that oracle automatically converted into tzh:tzm format.
second solution: setting default timezone of scheduler to the TZR i.e (US/Eastern) instead of the TZh:TZM value. I did that using below script
BEGIN
DBMS_SCHEDULER.set_scheduler_attribute (
attribute => 'default_timezone',
value => 'US/Eastern');
END;
above 2 solutions did not work for me. I have read on internet from some article that below query should return something like
"4/23/2012 11:02:13 US/Eastern" after setting the default timezone of scheduler to TZR but I am still getting "4/23/2012 11:02:13.715816000 AM -04:00".
select dbms_scheduler.stime
from dual;
the time in my online application is 1 hour later than is actually is. So 21.30is actually 20.30. This is my code:
select 1
from vex_rondes rde
where rde.datum_einde < current_timestamp
and rde.id = b_rde_idrde.datum_einde
is a date column filled with dates of course ins this format: 10-01-2013 20:45 (10th January 2013 20h45).How can I get this current_timestamp correct?
select 1
from vex_rondes rde
where rde.datum_einde+(1/24) < current_timestamp
and rde.id = b_rde_idbut that's not very elegant nor generic...
How can i convert the time part into second. for example
in mu table i have below rows
1753-01-01 09:18:00.000
1753-01-01 09:52:00.000
1753-01-01 09:36:00.000
I want to convert the time part of each rows to number of second in different column. so for the 1st rows it is 09:18:00.000 that means 9hour and 18 min = 9*60*60+18*60.
But that is complex column.
oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
"CORE 11.1.0.6.0 Production"
I am trying to write a function that accepts LOCAL DATE, LOCAL TIME, LOCAL TIME ZONE, COUNTRY CODE as inputs, and UTC DATE, UTC TIME as outputs. LOCAL DATE, LOCAL TIME, LOCAL TIME ZONE has to be of DATETIME datatype, and COUNTRY_CODE of VARCHAR2(3).
The data's are store in UTC time for all the country. we have to convert this to local country time. I build the procedure will generate the statement as per the country. But some of the timezone is working. like first example is working,second example is not working. I am getting following error.
dbtimezone is UTC-4
ORA-01882: timezone region not found
ex1: update Test.Maindata set MODIFIEDDATE=FROM_TZ(CAST(MODIFIEDDATE AS TIMESTAMP),'GMT') AT TIME ZONE 'America/New_York';
ex2:update Test.Maindata set MODIFIEDDATE=FROM_TZ(CAST(MODIFIEDDATE AS TIMESTAMP),'GMT') AT TIME ZONE 'Asia/Amman';
I need a query that convert number into time.
View 5 Replies View RelatedI have times stored as an integer in a table.
e.g.
102506 = 10:25:06
130455
How can I convert this to time format HH24:MI:SS?
I have a UI which is java and database in oracle 10g and database resides in India. Now the user use this application across the world. Date related value stores in IST format.
Now the requirement is whenever any user open the application in USA ,then date value should convert into their local time zone. So is there any way in oracle to convert and show the date value according to their local time zone.
How to get Time Difference between two DateTime Columns in Oracle 10g ?
View 10 Replies View RelatedIs there a way to estimate the storage savings for Hybrid Columnar Compression (HCC) in Oracle Exadata x3-2 machine ?
View 5 Replies View RelatedI need to convert the type of GMT to Local time, during data entry. I have a source table and a target table.
To make the insert get the most value, I have no problems:
insert into destination (SELECT * FROM WHERE source pointnumber = (SELECT MAX (pointnumber) FROM source));
But since times are different between the tables, I want to convert the data obtained to GMT -4:30 Time (Caracas - Venezuela), before inserting it.
I can use a function?
When I try to extract the date tag value from XML data, the time stored in 20120602153021 format i.e., YYYYMMDD24HHMISS format. The following statement extracts only date as 02-JUN-12 however do not extract the time part.
If I try the same in SQLplus with to_date it works however fails in PL/SQL.
XML data:
<?xml version="1.0"?>
<RECORD>
<REGTIMESTAMP>20120601130010</REGTIMESTAMP>
</RECORD>
PL/SQL Extract:
CURSOR c_xml_record
IS
SELECT extract(value(d), '//ACTIVATIONTS/text()').getStringVal() AS REGTIMESTAMP,
FROM t_xml_data x,
[code].......
how to set interval time every 4hrs in dbms_jobs but starting time 3.00am.
i am set trunc(sysdate)+4/24. but it will take starting at 12.00,4.00,.....in this way..
I have one inline view query which shows exec\ fetch : 2 sec\ 19 sec It gives 500 rows as final out put, when i give rownum<100 it shows exec\ fetch : 1 sec\ 000 sec, and i cannot use this rownum< 100 alternative as this is inline subquery of big query.
What does this exec and Fetch time is?
How to improve fetch time, (esp with sub-query) ?
I Have three field and first field for START TIME ,Second END TIME & Third DURATION AND Putting START TIME AND END TIME i am getting duration in minutes by using code
""SELECT TO_CHAR
(TRUNC (SYSDATE)
+ (TO_DATE (:T_DONATION_END_TIME, 'HH24MI') - TO_DATE (:T_DONATION_START_TIME, 'HH24MI')),
'HH24MI')
INTO :T_DONATION_DURATION
[code].......
I have a table which stores apointment start times and appointment end times. For the sake of this thread I will call them appt.start_time and appt.end_time. I then have a check in time and a check out time for the customer. The only thing is they ONLY way to distinguish between a check in time and a check out time is which one has the earlier time and which one has the later time. Obviously the earlier time will be the check and the later time will be the check out.
This is fine, however sometimes they may forget to check a person in or out and I need to determine whether the time should be insert into the check_in column or the check_out column. To do this I was thinking of comparing the time with the appointment start and end time and if it was closer to the appointment start time put it into the check_in column and if its closer to the appointment end time put it into the check_out column. But I was wondering how I would go about doing this.
The time I will want to compare against the appointment start and end time I will store in a variable called v_time and have this as part of my query, im just unsure of what way to write the query so as to check if the time is closer to the start or end time.
. I have this query:
select asl1.agentsessionid, asl1.endtime, asl2.starttime, 127 as agentstatus
from
(
select asl1.agentsessionid as sessionid1, min(asl2.agentsessionid) as sessionid2
from cti.agentsessionlog asl1
[code]...
As you can see from my where statement I want to compare the endtime with the startime. This query returns zero results. Is there a way to write the where statement different so I can have results?
My time zone has the offset of 2 hrs during summer and 1 hr during winter.If I want Oracle to tell me what was offset for particular day for example I want to know the offset for February 01, 2010 and August 01, 2010, is it possible?
View 1 Replies View RelatedI have an application in which time is show as . But, in the table in Oracle it is showing as 13:00. The application is taking the time from OS. OS time is 18:30 IST. Time in SYSDATE is also showing as 18:30. DBTIMEZONE is '+5:30'. what is the problem in Database and how that can be rectified to show the time as same as OS time.
View 4 Replies View RelatedWe have a Oracle 10g database with RAC and Dataguard. When we look at the AWR report, the wait time shown by Oracle for this database is very high.
Service Time : 15.36%
Wait Time : 84.64%
This would imply Oracle is waiting for resources 85% of the time and only processing SQL queries during 15% of its non-idle time. However when we check the OS (RHEL), the iowait is only about 10% and the CPU is 80% idle. This means that that processing horsepower is available.
As such, the results between the OS and Oracle database (AWR report) seems contradictory. OS says we have CPU/IO capacity, however Oracle says we don't.
how can i change row as column in oracle.
I wrote the one query which is return the following output..
Query:
SELECT RMC_N_ID,NVL(DISCOUNT_N_ID,NULL) AS DISCOUNT_N_ID,NVL(NULL,'') AS LOADINGS_N_ID,NVL(NULL,'') AS WARCOMB_N_ID,NVL(NULL,'') AS ENDORSECOMB_N_ID FROM UWRMC_DISCOUNT WHERE RMC_N_ID =224 AND DISCOUNT_N_ID IS NOT NULL
UNION
SELECT RMC_N_ID,NVL(NULL,'') AS DISCOUNT_N_ID,NVL(LOADING_N_ID,NULL) AS LOADING_N_ID ,NVL(NULL,'') AS WARCOMB_N_ID,NVL(NULL,'') AS ENDORSECOMB_N_ID FROM UWRMC_LOADING WHERE RMC_N_ID =224
UNION
SELECT RMC_N_ID,NVL(NULL,'') AS DISCOUNT_N_ID,NVL(NULL,NULL) AS LOADING_N_ID ,WARCOMB_N_ID,NVL(NULL,'') AS ENDORSECOMB_N_ID FROM UWRMC_WARCOMB WHERE RMC_N_ID =224
UNION
SELECT RMC_N_ID,NVL(NULL,'') AS DISCOUNT_N_ID,NVL(NULL,NULL) AS LOADING_N_ID ,NVL(NULL,'') AS WARCOMB_N_ID, ENDORSECOMB_N_ID FROM UWRMC_ENDORSECOMB WHERE RMC_N_ID =224
Result:
RMC_N_ID DISCOUNT_N_ID LOADINGS_N_ID WARCOMB_N_ID ENDORSECOMB_N_ID
---------- ------------- ------------- ------------ ----------------
224 0 87 0 0
224 0 88 0 0
224 0 0 0 93
224 0 0 0 94
224 0 0 88 0
224 0 0 89 0
224 82 0 0 0
224 83 0 0 0
I want the result like below
RMC_N_ID DISCOUNT_N_ID LOADINGS_N_ID WARCOMB_N_ID ENDORSECOMB_N_ID
---------- ------------- ------------- ------------ ----------------
224 82 87 88 93
224 83 88 89 94
How can i get this..
how can i convert from oracle forms 6i to oracle developer suite 10g
View 4 Replies View Related my data looks like:-
Ename Job salary
----- ----- -------
A manager 10000
B clerk 60000
C assistant 30000
A manager 50000
B clerk 20000
D accountant 40000
I want the result while select all data should look like:-
A B C D
manager clerk assistant accountant
10000 60000 30000 40000
50000 20000
I use Oracle 11g and a Middleware which sends the SQL Statements to the database. That's why I can't send you loggings.
However, I' got this SQL:
With CTE
AS
(
select * from
data A2
WHERE
A2.ID ='536031'
AND
A2.AttrID = '6'
)
That code gives me the following result:
ID.........Version....AttrID.......group
536031......3.........6..............test5
536031......3.........6..............test6
What I try to do. I want to get all groups. The Groups should be in one column...the the result must be the following:
ID.........group
536031...test5, test6
In SQL server I always used
SELECT ID,
STUFF((SELECT ',' + [group] FROM CTE WHERE ID = c.ID ORDER BY [Version] FOR XML PATH('')),1,1,'')
FROM (SELECT DISTINCT ID FROM CTE)c
to achieve that. Is there a similar function in oracle like XML PATH? Or another way the get the result?
how to convert row into column
below are my row data from qury
empno ename sal first_name last_name dof
10 rahul 1000 rah rao 01-jan-2000
20 rohit 2000 roh subuu 02-jan-2000
require output
10 20
rahul rohit
1000 2000
rahrao roh
rao subuu
01-jan-2000 02-jan-2000
can we convert RAW to number in sql.because i have to bitand of one raw and number variable.
View 3 Replies View RelatedI have table having below records.
empno ename deptno
101 a 10
102 b 20
103 c 10
104 d 20
105 e 30
Normal Output using Group by.
deptno count(*)
----------------------
10 2
20 2
30 1
I want to display like below(rows into columns)
--------------------------------------------------------
Requiredl Output
----------------------
10 20 30
2 2 1
Deptnos are in first row and cout of deptno nos are second row.