Performance Tuning :: Same Query Using Different Execution Plans?
Dec 26, 2011
I am executing the query below:
INSERT INTO temp_vendor(vendor_record_seq_no,checksum,rownumber,transaction_type,iu_flag)
SELECT /*+ USE_NL ( vd1 ,vd2 ,vd3 ) leading ( vd1 ,vd2 ,vd3 , tvd) */ vd1.vendor_record_seq_no, tvr.checksum, tvr.rownumber, tvr.transaction_type, 'U'
FROM vendor_data vd1,
vendor_data vd2,
vendor_data vd3,
(SELECT rownumber,
[code]....
It is taking different approaches (execution plans) while executing for same set of parameters. Due to which sometimes it executes successfully, but sometimes it fills all TEMP space and get failed. I am pasting both the execution plan (different from expalin plan) below:
I. Successfull Execution Plan:
------------------------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
------------------------------------------------------------------------------------------------------------------------
| 0 | INSERT STATEMENT | | | | 65612 (100)| | | |
|* 1 | HASH JOIN | | 1 | 6121 | 65612 (1)| 00:13:08 | | |
[code]....
II. Failed with TEMP space Execution Plan:
--------------------------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
--------------------------------------------------------------------------------------------------------------------------
| 0 | INSERT STATEMENT | | | | 1967 (100)| | | |
|* 1 | FILTER | | | | | | | |
| 2 | SORT GROUP BY | | 1 | 8233 | 1967 (3)| 00:00:24 | | |
|* 3 | HASH JOIN | | 1 | 8233 | 1966 (3)| 00:00:24 | | |
[code]....
View 8 Replies
ADVERTISEMENT
Apr 3, 2012
We have a query which makes Oracle behave very strangely. It is a straight-forward join between four tables of about 30.000 rows each, with some simple comparisons and some NOT LIKE:s.
When we run this query, it either takes about 1 second or more than 1.000 seconds to run and return the approximately 5.000 rows of the result. If we run the same query over and over again, it fluctuates back and forth between two different execution plans, apparently at random, 3 times out of 4 selecting the 1.000 second version and 1 time out of 4 the 1 second version.
There are no other connections to the database, the schema is not modified, the data is identical, the query is identical, and the response is identical, but the execution time alternates between 1 second and 1.000 seconds.On the same database instance we have another schema which is identical, but with slightly less data, which is used for development. The 1.000 second run times did not happen in that schema, but only in the test system's database.
Therefore we would REALLY like to understand what happens and why, so that we can avoid triggering this in the future. We could try locking the 1 second execution plan, but then we're afraid of doing the same thing wrong again in the future.
Here are the two execution plans that Oracle switches between, more or less at random:
Rows (1st) Rows (avg) Rows (max) Row Source Operation
---------- ---------- ---------- ---------------------------------------------------
5455 5455 5455 HASH JOIN (cr=15663 pr=10536 pw=0 time=855673 us cost=82273 size=2707430769293 card=14028138701)
79272 79272 79272 TABLE ACCESS FULL GROUPS (cr=1008 pr=0 pw=0 time=22154 us cost=277 size=10693 card=289)
[code]...
Rows (1st) Rows (avg) Rows (max) Row Source Operation
---------- ---------- ---------- ---------------------------------------------------
5455 5455 5455 HASH JOIN (cr=15664 pr=0 pw=0 time=778178696 us cost=30838477 size=741611997206725 card=3842549208325)
375411 375411 375411 TABLE ACCESS FULL GROUP_GROUPS_FLAT (cr=3782 pr=0 pw=0 time=51533 us cost=1029 size=25152738 card=375414)
[code]...
The query:
select g.ucid, a.ucid
from account a, groups g, group_members gm, group_groups_flat ggf
where a.ucid = gm.ucid_member
and gm.ucid_group = ggf.ucid_member
[code]...
And excerpts from the schema:
CREATE TABLE "PDB"."GROUPS"
(
"UCID" VARCHAR2(256 BYTE),
"UNIX_GID" NUMBER(*,0),
[...]
[code]...
View 4 Replies
View Related
Jan 27, 2012
When we use the AUTOTRACE / EXPLAIN PLAN we can see the (estimated) best execution plan the Optimizer found for our SQL Command. Is there a way to display all alternate execution plans the Optimizer has considered ?
View 1 Replies
View Related
Dec 24, 2012
The below query is taking high CPU almost 98% and longer time to execute.
SELECT ancestor,
Max(D.alarmstate) ALARMSTATE,
Max(D.sialarmstate) SIALARMSTATE,
Max(D.uncralarmstate) UNCRALARMSTATE,
Max(M.commstate) COMMSTATE,
Max(M.nncommstate) NNCOMMSTATE,
Max(M.servicestate) SERVICESTATE,
Max(M.abnormal) ABNORMAL,
CASE
[code]....
View 15 Replies
View Related
Apr 29, 2011
I have a weird optimizer behaviour on a 10.2.0.4 db.When i add "+0" or "-0" to a number predicate, the optimizer produces 2 differents plans. I dont see why. Here are the statements:
A -First statement with suboptimal plan :
SELECT /*KO*/ TFXPPRODUCT.PRODUCTID,
TFXPPRODUCT.PRODUCTTYPE,
VFUTFIX.Datech,
TFXPPRODUCT.SHORTLABEL,
VFUTFIX.TAUCPN,
VFUTFIX.Tik,
[code]....
View 1 Replies
View Related
Jan 14, 2013
DB=10.2.0.5
OS=RHEL 3
Im not sure of this, but seeing different plans for same SQL.
select sql_text from v$sqlarea where sql_id='92mb4z83fg4st'; <---TOP SQL from AWR
SELECT /*+ OPAQUE_TRANSFORM */ "ENDUSERID","LASTLOGINATTEMPTTIMESTAMP","LOGINSOURCECD","LOGINSUCCESSFLG",
"ENDUSERLOGINATTEMPTHISTORYID","VERSION_NUM","CREATEDATE"
FROM "BOMB"."ENDUSERLOGINATTEMPTHISTORY" "ENDUSERLOGINATTEMPTHISTORY";
[code]....
View 5 Replies
View Related
Aug 23, 2012
multiple execution plns for the sql_id from AWR,i have following questions
1.which plan is opimizer tcurrently using ?
2.how to make sure optimizer to pick right plans
SQL> select * from table(dbms_xplan.display_awr('fb0p0xv370vmb')) ;
PLAN_TABLE_OUTPUT
SQL_ID fb0p0xv370vmb
[code]....
View 8 Replies
View Related
Jul 20, 2013
Why the query is behaving differently with the different database.(execution plan)
Whatever the production database is having same database instance replicated to a new schema. I tried both the queries running on both environment.In prod the index has been used but in newdev it is not. This case existing primary key index were not been used.
View 6 Replies
View Related
Apr 12, 2013
How can i check the avg time taken by an execution plan. Actually i have a very big query and it changes its execution plan very often, we would like to lock the best execution plan and to find it , i would like to know the Average Execution Time the query takes when it runs using different different execution plans.
View 7 Replies
View Related
May 2, 2012
Performance issues with the below mentioned sql.After gone through execution plan we have found out the reason but we couldn't able to change the execution plan the way we want.
If we could able to join
HRMGR.HR_EXPANDED_BOOK table with MISBOMGR.ibm_client_mgr7_empid, MISBOMGR.ibm_client_mgr6_empid at earlier stage means before HRMGR.HR_EMP_STATUS_LOOKUP then my issue will be solved but somehow optimizer is not considering that path. Even i have added push_subq hint which will push sub queries to execute at earlier stage but no use. Why push_subq hint is not working in this scenario and what can be the other alternative to change the driving path.
Query :-
select /*+ push_subq */CEMP.EMP_ID,
CEMP.EMP_STATUS_CD,
EMP_STATUS_DESC,
MGR_6_EMP_ID,
MGR_7_EMP_ID
FROM
[code]........
Execution plan :-
------------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 16958 | 927K| 12008 (2)| 00:02:25 | | |
|* 1 | FILTER | | | | | | | |
| 2 | MERGE JOIN OUTER | | 173K| 9511K| 12008 (2)| 00:02:25 | | |
| 3 | REMOTE | HR_EXPANDED_BOOK | 173K| 7303K| 12005 (2)| 00:02:25 | INFODB | R->S |
|* 4 | SORT JOIN | | 11 | 143 | 3 (34)| 00:00:01 | | |
| 5 | REMOTE | HR_EMP_STATUS_LOOKUP | 11 | 143 | 2 (0)| 00:00:01 | INFODB | R->S |
|* 6 | TABLE ACCESS FULL| IBM_CLIENT_MGR7_EMPID | 1 | 8 | 2 (0)| 00:00:01 | | |
|* 7 | TABLE ACCESS FULL| IBM_CLIENT_MGR6_EMPID | 1 | 8 | 3 (0)| 00:00:01 | | |
------------------------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter( EXISTS (SELECT /*+ USE_HASH ("IBM_CLIENT_MGR7_EMPID") */ 0 FROM
"MISBOMGR"."IBM_CLIENT_MGR7_EMPID" "IBM_CLIENT_MGR7_EMPID" WHERE "MGR_7_EMP_ID"=:B1) OR EXISTS
(SELECT 0 FROM "MISBOMGR"."IBM_CLIENT_MGR6_EMPID" "IBM_CLIENT_MGR6_EMPID" WHERE "MGR_6_EMP_ID"=:B2))
4 - access("CEMP"."EMP_STATUS_CD"="EMPLU"."EMP_STATUS_CD"(+))
filter("CEMP"."EMP_STATUS_CD"="EMPLU"."EMP_STATUS_CD"(+))
6 - filter("MGR_7_EMP_ID"=:B1)
7 - filter("MGR_6_EMP_ID"=:B1)
Remote SQL Information (identified by operation id):
----------------------------------------------------
3 - SELECT "EMP_ID","EMP_STATUS_CD","MGR_6_EMP_ID","MGR_7_EMP_ID" FROM
"HRMGR"."HR_EXPANDED_BOOK" "SYS_ALIAS_2" WHERE "EMP_STATUS_CD"='P' (accessing 'INFODB' )
5 - SELECT "EMP_STATUS_CD","EMP_STATUS_DESC" FROM "HRMGR"."HR_EMP_STATUS_LOOKUP" "EMPLU"
(accessing 'INFODB' )
View 3 Replies
View Related
Mar 25, 2012
I have queries on the execution plan of a sql statement
Following is the example
create table t1 as select s1.nextval id,a.* from dba_objects a;
create table t2 as select s2.nextval id,a.* from dba_objects a;
insert into t1 select s1.nextval id,a.* from dba_objects a;
insert into t1 select s1.nextval id,a.* from dba_objects a;
insert into t2 select s2.nextval id,a.* from dba_objects a;
insert into t2 select s2.nextval id,a.* from dba_objects a;
insert into t2 select s2.nextval id,a.* from dba_objects a;
commit;
create index i1 on t1(id);
create index i2 on t2(id);
create index i11 on t1(object_type);
exec dbms_stats.gather_table_stats(user,'T1',cascade=>true);
exec dbms_stats.gather_table_stats(user,'T2',cascade=>true);
select count(*) from t1 where object_type='VIEW';
COUNT(*)
----------
8934
set autotrace traceonly explain
Can we say in the following case, that,
(1) First index on object_type is accessed to get rowids - t1.object_type='VIEW'
(2) Then the filter on owner is applied - t1.owner='SYS'
(3) Then the table T1 is accessed to fetch data from the rowids returned by the index I11 and filer application - TABLE ACCESS BY INDEX ROWID
Though I am unable to understand how filter can be applied to the rowids retrieved from index, we can see from the plan below that The rows accessed have reduced from 8550 to 1221 before we access the table...Thus filter "t1.owner='SYS'" is applied in between. Right?
another question is
Case 1 - do we retrieve a rowid from index for a given value, then retrieve required values from table for that rowid
Thus row at a time in both ... in loop
OR
Case 2 - we first fetch all rowids from index and then retrieve values from table one row at a time from the collection of rowids fetched?
Suppose Case 1 is what is happening then can we say, both the steps mentioned by IDS 2,3 in plan below are executed exactly equal number of times and the filter "t1.owner='SYS'" is applied at some later stage? Of course in this case the values in ROWS stand misleading then
select * from t1,t2 where t1.id = t2.id and t1.object_type='VIEW' and t1.owner='SYS';
Execution Plan
----------------------------------------------------------
Plan hash value: 26873579
-------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
-------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1221 | 233K| 915 (1)| 00:00:11 |
|* 1 | HASH JOIN | | 1221 | 233K| 915 (1)| 00:00:11 |
|* 2 | TABLE ACCESS BY INDEX ROWID| T1 | 1221 | 116K| 381 (1)| 00:00:05 |
|* 3 | INDEX RANGE SCAN | I11 | 8550 | | 24 (0)| 00:00:01 |
| 4 | TABLE ACCESS FULL | T2 | 161K| 15M| 533 (1)| 00:00:07 |
-------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - access("T1"."ID"="T2"."ID")
2 - filter("T1"."OWNER"='SYS')
3 - access("T1"."OBJECT_TYPE"='VIEW')
View 7 Replies
View Related
Oct 31, 2012
So the situation is like this
- Database A (20 tables)
- Database B (20 tables)
- Both A and B are Oracle 11gR2
- Both of these databases run on different hardware (A is a VM, B is on a physical host)
- The 20 tables in A and B have exactly same number of rows and after preparing the data, the schemas were analysed using the same DBMS_STATS parameters
Despite this, the execution plans appear to be quite different for the same queries between A and B
I imagine there is something outside of the Oracle table rowcounts, table stats, column stats, index stats that's resulting in the different execution plans.
View 3 Replies
View Related
Apr 30, 2012
refere to below 2 queries and their execution plans:
First Query
INSERT INTO temp_vendor(vendor_record_seq_no,checksum,rownumber,transaction_type,iu_flag)
SELECT /*+ USE_NL ( vd1 ,vd2 ,vd3 ) leading ( vd1 ,vd2 ,vd3 , tvd) */
vd1.vendor_record_seq_no, tvr.checksum, tvr.rownumber, tvr.transaction_type, 'U'
FROM vendor_data vd1,
[code]...
Second Query
SELECT vd1.vendor_record_seq_no, tvr.checksum, tvr.rownumber, tvr.transaction_type, 'U'
FROM ( select * from vendor_data vd1
where vd1.study_seq_no = 99903
AND vd1.control_column_seq_no = 435361232
[code]...
Both are to achieve same output but written in different ways. CAn I get same exectuion plan from 1st query as there is for 2nd using hints
View 10 Replies
View Related
Mar 5, 2013
One of our clients is using Rule Based Optimizer on Oracle 10.2.0.3.0
2-3 weeks backs, during performance issue in one of the sql queries, one of our team members executed tuning adviser for it, created SQL profile and the subsequent execution of the SQL did not took much time (less I/O). Now it took hardly a minute to execute
When this happened I checked that the SQL profile forced that particular query to use CBO (say plan_hash_value is PHV1 here). Yesterday the same query again took 15-20 minutes for execution. I checked that even for this execution the query used the same SQL profile but "this time" with different plan_hash_value - say PHV2.
Today again the query executed in less than a minute and used the plan_hash_value as PHV1.
select distinct plan_hash_value,timestamp from dba_hist_sql_plan where sql_id='mysqlid' order by 1,2;
PLAN_HASH_VALUE TIMESTAMP
--------------- --------------------
890360113 20-feb-2013 16:38:39
3736413466 04-mar-2013 08:12:52
1237282258 03-jan-2013 17:15:02
I confirmed from awrsqrpt as well that different plans were used for different plan_hash_values and every time same SQL profile was used
SQL> select name,CATEGORY,SIGNATURE,CREATED,LAST_MODIFIED,TYPE,STATUS,FORCE_MATCHING from dba_sql_profiles;
NAME CATEGORY SIGNATURE CREATED LAST_MODIFIED TYPE STATUS FOR
------------------------------ ------------------------------ ---------- -------------------- -------------------- --------- -------- ---
SYS_SQLPROF_015ffffcc3e1c5b000 DEFAULT 1.5512E+19 20-feb-2013 16:30:48 20-feb-2013 16:30:48 MANUAL ENABLED NO
I am unable to understand how execution plan and thus plan_hash_value is changing for the same SQL Profile. I read that SQL Profile (unlike stored outline) keeps up with increasing data volume and may not keep up with changing data distribution.
I checked that values for 4 bind variables out of 81 are different for execution between today and yesterdays' run(queried v$sql_bind_capture based on last_captured)
My questions are
1) does the different plan_hash_values with different execution plans for query using same SQL profile mean the query was hard parsed multiple times and still used the same SQL profile?
2) If that is the case why I never saw child_number = 1 in any of the views for the same sql_id. I tried it repeatedly over last 2 weeks and always found child_number=0 in v$sql (also loaded_versions=1)
3) Does the different values of bind variable are causing this flip-flop of the plans? How can I conclude this?
I have 2 plans with 2 different plan_hash_values. I know which would be better. How can I force the sql to use better plan in the two in this case where I am using Rule Based Optimizer and have SQL profile created If this is not possible then how can I create stored outline from the existing plan (not waiting for subsequent execution to take place).
View 6 Replies
View Related
Jul 11, 2013
The problem was describe:
- First time to execute: Using all indexes on 2 tables
- Second time to execute: Using only indexes on first table, full table scan on the other
- Third time to execute: Do FTS on both of tables.
Now, I show the objects and relate information here:
The Tables:
system@dbwap> select count(*) from my_wap.news_relation;
COUNT(*)
----------
272708
system@dbwap> select count(*) from my_wap.news_content;
COUNT(*)
----------
95092
system@dbwap> desc my_wap.news_content;
Name Null? Type
----------------------------------------------------- -------- ----------------
ID NOT NULL NUMBER(11)
SUBJECT NOT NULL VARCHAR2(500)
TITLE VARCHAR2(4000)
STATE NUMBER(1)
IMGPATH VARCHAR2(500)
ALIGN VARCHAR2(10)
[Code]....
View 7 Replies
View Related
Feb 1, 2010
When viewing SQL statements in Top Activity in OEM, I am only able to see the Explain Plan for the most recent statement. Is there a setting to increase the number execution plans kept?
View 1 Replies
View Related
Mar 9, 2010
In my code I am using delete statement which is taking too much time to execute.
Statement is as follow:
DELETE FROM TRADE_ORDER_EMP_ALLOCATION T
WHERE (ARTEMIS_SOURCE_SYSTEM_ID,NM_ARTEMIS_SOURCE_SYSTEM,CD_BOOK_KEY,ACTIVITY_DT)
IN (SELECT ARTEMIS_SOURCE_SYSTEM_ID,NM_ARTEMIS_SOURCE_SYSTEM,CD_BOOK_KEY,ACTIVITY_DT
FROM LOAD_TRADE_ORDER
WHERE IND_IS_BAD_RECORD='N');
Tables Used:
oTRADE_ORDER_EMP_ALLOCATION Row count (329525880)
oLOAD_TRADE_ORDER Row count (29281)
Every column in "IN" clause and select clause is containing index on it
Every time no of rows which to be deleted is vary (May be in hundred ,thousand or hundred thousand )so that I am Unable to use "BITMAP" index on the table "LOAD_TRADE_ORDER" column "IND_IS_BAD_RECORD" though it is containing distinct record in it.
Even table "TRADE_ORDER_EMP_ALLOCATION" is containing "RANGE" PARTITION over it on the column "ARTEMIS_SOURCE_SYSTEM_ID". With this I am enclosing table scripts with Indexes and Partitions over it.
way for fast execution in of above delete statement?
View 4 Replies
View Related
Feb 8, 2011
refer following sql statements and code
Session 1
create table tab1 as select * from dba_objects where object_id is not null;
alter session set events '10046 trace name context forever, level 12';
declare
x number;
begin
for i in 1..4
loop
[code]....
Session 2
after "starting" the above pl/sql block from Session 1, I keep on querying tab2 from Session 2 And as soon as 2 records are inserted in tab2, I create index from Session 2
select * from tab2;
select * from tab2;
select * from tab2;
N
----------
1
2
create index i on tab1(object_id);
As I have tested from a single session (just before this test) such index is used for the sql statement
select count(1) into x from tab1 where object_id=2331;
However when I checked the trace file I am not geeting results as expected
I am expecting 4 execution plans - 2 FTS and 2 Index Access scans and for this I am issuing following command
tkprof dst1_ora_7369.trc dst1_ora_7369.txt aggregate=no sys=no
But unfortunately I am getting following output
SELECT COUNT(1)
FROM
TAB1 WHERE OBJECT_ID=2331
call count cpu elapsed disk query current rows
------- ------ -------- ---------- ---------- ---------- ---------- ----------
Parse 1 0.00 0.00 0 1 0 0
Execute 4 0.00 0.00 0 2 0 0
[code]....
1) Why I am unable to see 4 execution plans - 2 with FTS and 2 with Index access when I mentioned 'aggregate=no'?
2) Whether the index i will be used for last 2 iterations after first 2 iterations of FTS?
If answer to above question 2) is 'No'
By which method I can force an ongoing sql statement in loop to take different execution path? Of course I can't hard parse sql in 'that' current session Will flushing Shared pool work in above case?
View 6 Replies
View Related
Jul 21, 2010
I have two Oracle instances that are setup identically.When I run a query on one of them, it takes around 3 seconds, on the other it takes around 200 seconds.
I have looked at the explain plans, and it has shown me what I think is the problem. On one instance, it does a join on two tables, then runs the other filter/access predicates. On the other instance it runs the filter/access predicated first, then does the expensice join. The one that does the join first is the one that takes around 200 seconds. How to tell Oracle to make this join after runnning the other predicates?
View 15 Replies
View Related
May 18, 2010
Can we have same execution plan for a create table statement where the name of the table changes every time as follows:
create table test
as
select * from t1
Here table name changes from test to another table name next time
View 6 Replies
View Related
Aug 6, 2012
I'm planning to decrease the time taken to execute data by managing the redo log file but I'm kinda stuck in some aspect : > Why is my OPTIMAL_LOGFILE_SIZE is showing NULL ? > I'm trying to resize the LOGFILE capacity from 100M to 200M and I'm also adding 1 more LOG GROUP with 200M capacity too but turned out that didn't decrease my execution time.
View 12 Replies
View Related
Jun 4, 2010
attached query giving consistent execution plan but different timings across run
SELECT /*+ INDEX (CRT CRT_CUN_FK_I)*/
DISTINCT odr.dve_id
FROM company_requirements crt, orders odr, lelo_products la_pct
WHERE crt.qtn_cun_id = 10035637--10000021--10035667
AND crt.ID = odr.crt_id_quote_implemented
AND NVL (odr.cancellation_date, '31-Dec-9999') = '31-Dec-9999'
[code]....
we have 4 databases, 2 on each servers, such that db1 and db2 on server1 and db3 and db4 on server2
refer count of the records for column of biggest table in the query, taken on all 4 databases (The column is nullable)
select count(*) from company_requirements crt WHERE crt.qtn_cun_id = 10035637
db1 = 73335
db2 = 89073
db3 = 81182
db4 = 82936
First I executed the query on db1 and db2 while there wasn't any user logged on to the system
db1
**********
call count cpu elapsed disk query current rows
------- ------ -------- ---------- ---------- ---------- ---------- ----------
Parse 1 0.06 0.08 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 17.47 473.39 85704 1508102 0 0
[code]...
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
db file sequential read 85704 0.31 460.55
latch free 1 0.00 0.00
SQL*Net message from client 1 14.98 14.98
[code]...
Why the elasped time changed when data and plan hasn't changed at all? Also why the plan has different stats for round 1 and 2 on db1 and db2?
I ran it 2 times each round each database so hard parsing shall not be issue.Also why the number of rows accessed are different in db1,db2 and db3,db4 especially for step1 when count of crt.qtn_cun_id is similar?
In fact when the query was taking long I was the only user on the system Also I used hard coded value (no bind variables at all)
I checked num_rows, distinct keys as well which are quite similar across all 4 databases Also no stats where gather during the query execution
What I should have checked or monitored?
View 10 Replies
View Related
Jun 16, 2010
I have a question about database fragmentation.I know that fragmentation can reduce performance in query times. The blocks are distributed in many extents and scans process takes a long time. Oracle engine have to locate the address of the next extent..
I want to know if there is any system view in which you can check if your table or index has high fragmentation. If it's needed I will have to re-create, move or rebulid the table or index, but before I want to know if the degree of fragmentation is high.
Any useful script or query to do this, any interesting oracle system view?
View 2 Replies
View Related
Mar 20, 2012
Which step in the following plan is the first step of execution
I reckon it is "TABLE ACCESS BY INDEX ROWID| BANK_BATCH_STATE"
Is that correct?
In the "Predicate Information (identified by operation id):"
section the predicates - access and filter for the step "TABLE ACCESS FULL | PYMNT_DUES" are displayed first
Isn't there any relation between the order of execution steps and the order in which predicates are displayed?
Execution Plan
----------------------------------------------------------
Plan hash value: 538700484
-------------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
-------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 2364 | 15 (14)| 00:00:01 |
|* 1 | FILTER | | | | | |
| 2 | HASH GROUP BY | | 1 | 2364 | 15 (14)| 00:00:01 |
| 3 | NESTED LOOPS | | 1 | 2364 | 14 (8)| 00:00:01 |
| 4 | NESTED LOOPS | | 1 | 2313 | 13 (8)| 00:00:01 |
| 5 | NESTED LOOPS | | 1 | 2281 | 12 (9)| 00:00:01 |
| 6 | NESTED LOOPS OUTER | | 1 | 2255 | 11 (10)| 00:00:01 |
|* 7 | HASH JOIN | | 1 | 175 | 6 (17)| 00:00:01 |
|* 8 | INDEX RANGE SCAN | INDX_2 | 12 | 612 | 2 (0)| 00:00:01 |
|* 9 | TABLE ACCESS FULL | PYMNT_DUES | 43 | 5332 | 3 (0)| 00:00:01 |
| 10 | VIEW PUSHED PREDICATE | | 1 | 2080 | 5 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 154 | 5 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 103 | 4 (0)| 00:00:01 |
|* 13 | TABLE ACCESS BY INDEX ROWID| BANK_BATCH_STATE | 1 | 32 | 2 (0)| 00:00:01 |
|* 14 | INDEX RANGE SCAN | INDX_BBS_1 | 3 | | 1 (0)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID| DAILY_CHECK | 1 | 71 | 2 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | INDX_SEARCH | 1 | | 1 (0)| 00:00:01 |
|* 17 | INDEX RANGE SCAN | INDX_2 | 1 | 51 | 1 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | INDX_IAM_SR_NO | 1 | 26 | 1 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | INDX_2 | 1 | 32 | 1 (0)| 00:00:01 |
|* 20 | INDEX RANGE SCAN | INDX_2 | 1 | 51 | 1 (0)| 00:00:01 |
-----------------------------------------------------------------
View 3 Replies
View Related
Aug 9, 2010
Somewhere I read that we should not use hints in Oracle production environments, but we can use hints in the development environment and on achieving the desired execution plan we can adjust the 'statistics' to follow that plan without hints.
Q1. If it is true what statistics do we adjust for influencing the execution plan and how?
For example, I have the following simple query:
select e.empid, e.ename, d.dname
from emp e, dept d
where e.deptno=d.deptno;
emp.empid, emp.deptno and dep.deptno columns have indexes and the tables have the standard structure as found in the basic oracle examples.
If I look at the execution plan of the above query then I see that the driving table is empand the driven table is dept.Also the type of join that is taking place is 'Nested Loop'.
Questions: With respect to the above query,
Q 2. If I want to make dept the driving table and emp the driven table then how can I adjust the statistics to achieve that?
Q 3. If I want to use hash join instead of a nested loop join then then how can I adjust the statistics to achieve that?
I can put the ordered and the use_hash hint to effect this but again I have heard that altering statistics is a more robust way to control an execution plan as compared to hints.
View 6 Replies
View Related
Dec 6, 2012
We're using Oracle 10g for development purposes. I have 2 same schema with approximately same data. I'm running same query on 2 schemas and I see that the first schema runs the query around 20sec and the 2.schema less than 1 sec. I thought first that there may be missing constraints or indexes but all are the same.
I checked the plan for the 2 schemas and I see that the plan is different.
Here is the query:
SELECT ccc.ComponentId AS "ComponentId", ccp.Code AS "ParentCode", ccc.Code AS "ChildCode" FROM CatalogueComponent ccp INNER JOIN CatalogueComponent ccc ON ccp.ComponentId = ccc.ParentComponentId WHERE ccc.ComponentId IN (20934777, 1594747)
I'm sending also the 2 output of PLAN results from 2 different schemas.
what should I do to fix the problem with the NAFBCA schema.
Attached File(s)
NAFBCA.JPG ( 57.49K )
Number of downloads: 6
NAFBCA2.JPG ( 60.36K )
Number of downloads: 4
View 1 Replies
View Related
Dec 6, 2012
We're using Oracle 10g for development purposes.I have 2 same schemas with approximately same data.I'm running same query on 2 schemas and I see that the first schema runs the query around 20sec and the 2.schema less than 1 sec. I thoughtfirst that there may be missing constraints or indexes but all are the same.I checked the plan for the 2 schemas and I see that the plan is different.
Here is the query:
SELECT ccc.ComponentId AS "ComponentId", ccp.Code AS "ParentCode", ccc.Code AS "ChildCode" FROM CatalogueComponent ccp INNER JOIN CatalogueComponent ccc ON ccp.ComponentId = ccc.ParentComponentId WHERE ccc.ComponentId IN (20934777, 1594747)
I'm sending also the 2 output of PLAN results from 2 different schemas.
View 19 Replies
View Related
Jun 21, 2011
I use oracle 11g r2
i have created a table for objects
create table table_t
(Record_no number,
t_no number,
position SDO_GEOMETRY
, occupation_time number);
and inserted many values (examples below )
INSERT INTO tra VALUES
(2,
20503,
SDO_GEOMETRY
(2001,
NULL,
SDO_POINT_TYPE (1387, 0, NULL),
NULL,
NULL),
23037
)
/
and( position) indexed as Rtree spatial index
now when i run spatial query such as
SELECT * FROM tra t WHERE
SDO_FILTER(t.position, MDSYS.SDO_GEOMETRY(2001,NULL,NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),
MDSYS.SDO_ORDINATE_ARRAY(0,0,9000,0)), 'querytype=WINDOW') = 'TRUE' and t.position.sdo_point.X=1;
i do not know how many IO accrued ?
i tried set autotrace on
but the physical read is 0 , this is not possible because i have more than 100000 objects there and all indexed as R-tree
View 2 Replies
View Related
Jun 24, 2011
Below query is taking a long time...
select gam.SOL_ID,COUNT(gam.FORACID) from gam,smt where
gam.ACID=smt.ACID and gam.ACID NOT IN(select ACID from imt) and
gam.SCHM_TYPE in('SBA','CCA','CAA','ODA') and GAM.ACCT_CLS_FLG='N' and
gam.SOL_ID IN(select SOL_ID from IMT) group by gam.SOL_ID
/
attached is the explain plan.
in which index on IMT table is not used. And the query is doing a FTS on IMT table. What needs to be done to avoid FTS on IMT table.
View 10 Replies
View Related
Dec 14, 2010
In SQL, almost all the thing which are possible with join is possible with sub-query also and vice-a-versa.
So when should I use sub-query and when should I go for join?
View 9 Replies
View Related
