I would like to use dynamic sql for an select query with where clause and then use the dynamic sql in pl/sql stored procedure. how to create dynamic sql (select query) and how to use it in pl/sql stored procedure.
View 4 Replies
Execute sp1 param1...param6
Execute sp2 param1...param8
Execute sp3 param1...param4
All these stored procedures deals with insert/updated transactions . i need to create a new stored procedure to execute all this in a single stored procedure which will be something like
create procedure sp4(param1...param8)
as
begin
Execute sp1 param1...param6
rollback if any error
Execute sp2 param1...param8
rollback if any error
Execute sp3 param1...param4
rollback if any error
end;
I want to execute a dynamic query which is stored in a Table.
Output of that query should be stored in database server.
Is there any way i can create a dynamic procedure? I have created a sample code but issue is i cannot make the below data type dynamic as per the query.
en com_fund_info_m%ROWTYPE;
CREATE TABLE TEMP (SQLSTATEMENT VARCHAR2(100))
DECLARE
TYPE r_cursor IS REF CURSOR;
c_emp r_cursor;
en com_fund_info_m%ROWTYPE;
[code].....
ORA-06502...I have database on oracle 9i on Solaris 9. I create a generate procedure that create dynamic procedure through DBMS_SQL. On this database I got the ORA-06502 error. When I tried to run the same procedure on the same database on oracle 8i on NT this work fine.
View 3 Replies View RelatedPFB code i used to schedule a job as per my requirement. And the procedure is executing fine, but when im about to run it is getting hang.
create or replace procedure scheduler_alert(frq varchar2,intrvl number) is
begin
dbms_scheduler.create_job(
job_name=>'scheduler_alert',
job_type=>'stored_procedure',
job_action=>'alertlog_error',
start_date=>SYSTIMESTAMP,
repeat_interval=>'FREQ='||frq||';INTERVAL='||intrvl,
enabled=>true,
auto_drop=>false);
end;
/
When im trying to run the job it is getting hang.
exec dbms_scheduler.run_job('scheduler_alert');
how to use a synonym in a stored procedure.
I have created a public synonym for a remote table on a different schema.
Im now trying to use the synonym to load that data into a temporary table in my schema using a stored procedure and im getting an error.
how to use a synonym in a stored procedure.
I want to call a shellscript which is in application sever through a stored procedure in database sever.i dont do this by dbms scheduler.
May i knw some sytax with examples and the settings to change to accept the external procedure call.
I've written a Java stored procedure that deletes some provided file. The PL/SQL procedure looks like :
procedure delete (file in varchar);
The procedure does the work correctly when the provided file name exists on the DB server, but doesn't when the file is ou of the DB server.
Is there a way to resolve this ?
I entered the following procedure code into SQLPLUS for compilation, but it just hangs. I suspect the cause is an infinite loop, but I can't locate it.
CREATE OR REPLACE PROCEDURE populate_sales_fact
AS
BEGIN
INSERT INTO sales_fact
(orderid,
prod_key,
order_day_key,
shipping_day_key,
sales_dollar_amount,
quantity,
cust_key,
emp_key)
[code]....
I have a sequence my_seq in schema schema1. I have granted select on this sequence to schema2. Doing :
select schema1.my_seq.nextval from dual
in schema2 work as expected. However when I try to compile a package body in schema2 using my_seq in an insert statement, it fails with:
PLS-00302: component 'MY_SEQ' must be declared
What's even stranger is that I have stored procedures that are using the exact same code that are currently compiled and working. Recompiling them yields this error. How is this possible?
Interviewer asked me "Tell me Diff. between Stored procedure vs. Function ".....I given technical answer which is mentioned in my Faq..But he asked me , dont gv me answer in technical manner..He was interested in which case u use Stored procedure and Function....
View 3 Replies View Relatedhow to you execute a stored procedure in ORACLE..For example in SQL SERVER its just
EXEC Proc_Name ParameterValues
How the hell do you do this in oracle i just want to test if my stored procedure works.
connect the following concepts/information I've been collecting. This is not my field but I'm interested in filling some of mine conceptual/technical gaps.
From a JDBC perspective, one of the benefits of Prepared (and so Callable) statements have over the regular ones is that the statement is "compiled"(*) once and then reused (performance gain).
(*) for SQL statements: building of parse tree and exec.plan
In which way can this notion be extrapolated to invocation of Oracle Stored Procedures through CallableStatements? (After clearing my doubts, I may end concluding that the only relevant feature of CallableStatements is their capacity to deal with stored procedure invocations)
According to procedure's precompiled execution plan SQL compilation implies execution plans generation PL/SQL compilation implies P-code generation and, SQL statements (from PLSQL code) are treated no differently by Oracle than SQL from Java or C/C++. These SQLs will be parsed and execution plans for those SQLs created.
...
When the PL code executes the SQL statement, only then does the SQL engine receive the SQL, parse it, and create an execution plan for it.
Therefore, even when the stored procedure can be parsed and cached in SGA (through the OracleConnection.preparedCall("proc") invocation), the SQL statements won't be effectively compiled until they are executed, right? And going deeper, will those SQL statements be cached to be reused in future invocations of the containing stored procedure? Is this a characteristic of the regular stored procedure execution in Oracle? or is it due to the CallableStatement "origin"?
i have this stored procedures:
create or replace
PROCEDURE INSERTXML2(
p_xml_in XMLType,
p_table IN VARCHAR2 ) AS
v_context DBMS_XMLStore.ctxType;
v_rows NUMBER;
BEGIN
[code]....
that works well in little XML files but in XML files that are bigger the stored procedures to not work because string maximum length in Oracle is 4000.
im working with Oracle SQL Developer and Sap Mii, the XML file is generated in Sap Mii and then i have to pass it in one step to database..
I'm trying to create a stored procedure that has two temporary tables within it, and then queries both them tables and inserts the results into a table. I created the script but when they try to run in on the server it wont run.
CREATE OR REPLACE PROCEDURE UpdateFIDB_SP
IS
BEGIN
CREATE GLOBAL TEMPORARY TABLE myAAAA
AS
(SELECT AAAA.1111, AAAA.2222, BBBB.3333_EXT, CCCC.4444, DDDD.5555, DDDD.6666, DDDD.7777,
DDDD.8888, AAAA.9999, EEEE.1010, EEEE.1A1A, EEEE.1B1B, FFFF.3333_LO, FFFF.1C1C,
[code]........
I am new to the wonderful world of Oracle. I want to be able to view the results of a stored procedure in an output window, say out of Oracle SQL developer. Unfortunately it appears I need to write some more code to actually view the data. Consider the following:
CREATE OR REPLACE
PROCEDURE TESTSPROC2(c_test out sys_refcursor) AS
BEGIN
open c_test for
select * from test_table order by id_no;
END TESTSPROC2;
to view this I need something on the order of:
DECLARE
cc sys_refcursor;
r cc%rowtype;
BEGIN
TESTSPROC2(C_TEST => cc);
loop
fetch cc into r;
exit when cc%notfound;
DBMS_OUTPUT.PUT_LINE('C_TEST = ' || r.data_element);
end loop;
close cc;
END;
But this is weakly typed so I get all sorts of errors associated with the row definition of line 3. create the record based on the table (something like: r test_table%rowtype).
What I really want is a generic reader than can be ported around to output any sproc I put together.
On a more generic note, why Oracle has chosen to make PL/SQL inordinately more complicated than say MS SQL/Servers tSQL? I mean in tSQL I would just write:
CREATE OR REPLACE PROCEDURE TESTSPROC2
AS
select * from test_table order by id_no;
GO
and viola, a nice result set spits out in Query Analyzer (or a .net application).
I have to call oracle stored procedure or a function to update user id of one or several rows depending on what user selects.
The oracle person will be writing the stored procedure or function. I am a java developer but was never involved in writing oracle functions. So..
I want to know what is the difference betn stored procedure and function?
From java point of view are there any guidelines when to prefer one over the other(betn stored procedure and function).
After compiling a simple valid SP in Toad for Oracle 8.5.1:
CREATE OR REPLACE PROCEDURE proc_test
AS
DECLARE v_name VARCHAR2(20) := 'Ed Edson';
BEGIN
DBMS_OUTPUT.PUT_LINE('Hi, my name is ' || v_name);
END;
The SP is not added to the schema. Also the three status fields (status, created and Last Update in the Procedure Editor remain <Unknown>. It is not a rights or privilege issue, because the creation works perfectly in SQL*Plus!
I want to call an exe file through DB Procedure. How it is possible?
1create or replace procedure proc3
2is
3begin
4 host('calc');
6* end;
from FORMS it works fine but it does not work through DB. I found same question through this link
[URL].........
but no answer is given.
i have created a stored procedure with a cursor in order to perform a function where the annual_sal from the employee_annual_sal table is refered and checked. The empno for all the records which satisfies the condition mentioned inside the loop should be displayed in an variable. My code is below
create or replace PROCEDURE sp_test_cursor(out_empno OUT number)
IS
v_get_data number;
v_get_empno number;
cursor c1 is
select annual_salary
from employee_annual_sal;
[Code]...
What should i do to return mulitple values in a single variable??
I have the following Stored Procedure:
CREATE OR REPLACE PROCEDURE AFESD.TEST_PROC (I_NUM IN NUMBER,
I_NUM2 IN NUMBER DEFAULT 3, D_DATE IN DATE DEFAULT sysdate,D_OUT OUT DATE)
IS
[Code]....
I dont know what I need to pass in order to give it the default value.
i Have Write A SP But Show me Error when i Compile It.
Create or Replace Procedure PREPAIDEXPENSE(v_OperationType varchar2(1))
v_ATTM_TXN_TYPES_CODE ACC_TXN_TYPES_MST.ATTM_TXN_TYPES_CODE%TYPE;
v_ATTM_TXN_TYPES_DESC ACC_TXN_TYPES_MST.ATTM_TXN_TYPES_DESC%TYPE;
v_ATTM_STATUS ACC_TXN_TYPES_MST.ATTM_STATUS%TYPE;
v_ATSM_STAGE_ID ACC_TXN_TYPES_MST.ATSM_STAGE_ID%TYPE;
v_PP_ACCOUNT_GL ACC_TXN_TYPES_MST.PP_ACCOUNT_GL%TYPE;
[code]....
Error:SQL command not properly ended
How to take a stored procedure last run without using DBA_AUDIT_TRAIL sys table.
View 6 Replies View RelatedI have been developing in MS SQL for about 15. So I'm still getting use to the syntax and features within Oracle.I'm trying to create a stored procedure that has two temporary tables within it, and then queries both them tables and inserts the results into a table.I created the script but when they try to run in on the server it wont run.
CREATE OR REPLACE PROCEDURE UpdateFIDB_SP
IS
BEGIN
CREATE GLOBAL TEMPORARY TABLE myAAAA
AS
(SELECT AAAA.1111, AAAA.2222, BBBB.3333_EXT, CCCC.4444, DDDD.5555, DDDD.6666, DDDD.7777,
DDDD.8888, AAAA.9999, EEEE.1010, EEEE.1A1A, EEEE.1B1B, FFFF.3333_LO, FFFF.1C1C,
AAAA.1D1D
[code].....
There is one DBMSJOB i created schedule to run every day at 22:00 hrs. The jobname is IT_TO_DUM_LOADING and the job type is Stored procedure.
I queried all_source and found stored procedure does not exist in database.
SQL> select text from all_source
2 where type = 'PROCEDURE'
3 and name ='IT_TO_DUM_LOADING';
no rows selected
But i could see the job details in dba_scheduler_jobs view. I cannot use WHERE clause in dba_scheduler_jobs to restrict and find only the job row as i receive time zone error. How it is possible to view the job in dba_scheduler job view whereas i could not find the stored procedure of its in all_source?
I am familiar with WRAP command.It is used in command prompt.
C:> wrap iname=filename.sql
and this thing will convert filename.plb file.
but now I want to wrap my stored Procedure or function.how can i do this thing?it is saved in my disk?
I created the following stored procedure which I am calling from a script. I compiled my Stored Procedure with Debug Info. For some reason Execution jumps from the second BEGIN to the END statement.
Since the SP compiles w/o any errors, I suspect I have a logic error.
Stored Procedure:
CREATE OR REPLACE PROCEDURE VALIDATE_PATIENT_NEW
(
VALIDATED OUT int,
LAST_NAME IN VARCHAR2 DEFAULT NULL,
FIRST_NAME IN VARCHAR2 DEFAULT NULL,
DOB date DEFAULT NULL,
PAT_NUMBER OUT int,
FACILITY_KEY OUT CHAR
)
AS
BEGIN
/* SELECT * */
BEGIN
[code].......
Can i use lexical parameter within my procedure
select '' employee_no, ptdv.fiscal_year, ptdv.trans_month, ptdv.location_code, ptdv.acc_code,ptdv.acc_desc,sum(ptdv.EARNING)-sum(ptdv.DEDUCTION) debit,0 credit,1 tag
from pr_trans_dtl_v ptdv
where ptdv.trans_month=nvl(mtrans_month, ptdv.trans_month)
[code].......
see the highlighted row. can i use and ptdv.trans_type_row in &vtype instead of and ptdv.trans_type_row in ('R','A')
where the vtype is varchar2(100) and vtype:='(''R'',''A'')';
I am trying to create a stored procedure in TOAD. I've found example code on the Internet to write a stored procedure, but it doesn't seem to work with Toad. I tried to write the procedure and execute it to save it to the DB, and instead I keep getting error messages like "an INTO clause is expected in this SELECT statement" when I used the
CREATE OR REPLACE PROCEDURE testing
AS
BEGIN
SELECT *
FROM CPK;
END;
or "bad bind variable 'CPKS'" when I tried the following instead:
CREATE OR REPLACE PROCEDURE testing
AS
BEGIN
SELECT *
FROM CPK;
Into :Cpks;
END;
post some example code here with short explanations for me on how to write a stored procedure.
I come from a world of MSSQL and have been thrown into doing some Oracle work. Great! Ok, moving on.. I work in an environment where I do not have direct access to the database tables that I need data from. As a workaround, I have been asked to create a stored procedure that will be loaded into our CRM system's production db once it goes through the internal "approval" process.Basically, I need to return a result set back to the client by calling a stored procedure.
Version 1 of this that was already in place was done with the following code.
procedure events_by_day (p_start_date IN OPERATION_LOG.DT%type,
p_end_date IN OPERATION_LOG.DT%type,
p_results OUT SYS_REFCURSOR) IS
BEGIN
OPEN p_results FOR
[code]....
Then the code is executed from the client side like so:
events_by_day(p_start_date => to_date('2012-3-27 00:00:00', 'YYYY-MM-DD HH24:MI:SS'),
p_end_date => to_date('2012-3-29 23:59:59', 'YYYY-MM-DD HH24:MI:SS'),
p_results => r_cursor);
LOOP
FETCH r_cursor
INTO event_date, event_acct_no, event_type, event_count;
[code]....
As you can see, a SYS_REFCURSOR was used in this case to pass the data back.
