ORA-06553 / PLS-306 - Wrong Number Or Types Of Arguments In Call
Oct 24, 2011
When I try to run: select xa_time_cnv.utc_to_loc(sysdate ,('yyyy/mm/dd hh24:mm:ss') ) Fecha from dual; This message appears:
ORA-06553: PLS-306: wrong number or types of arguments in call to 'UTC_TO_LOC'
the function is:
/* utc_to_loc
** Purpose: utc_to_loc is a function written to convert a utc time, to the local time zone.
*/
FUNCTION utc_to_loc(utc_datetime in DATE) return DATE IS
CURSOR c_get_utc_offset(utc_datetime DATE) IS
SELECT Offset FROM TimeTran WHERE
utc_datetime BETWEEN UTCStart and UTCStop;
[code]...
My database is on GMT -3 and I try to view convert UTC-TO LOCAL.
I'm trying to call a custom made PL/SQL function in a SQL query. I want to supply the values of the parameters during the query. I can call the function if I "hard code" the parameter values, but when I try to supply them I get the ORA-06553 error.
This call works:
select pkg_tm_import_util.wb_screen_hr_refresh_func('','','','','','','','','','','','') from dual
However, this does not, but should be the same as the call that works:
i am getting PLS-00306: wrong number or types of arguments in call to 'SECURITY_AUDIT_DTL_TYPE' error below code.
CREATE OR REPLACE PROCEDURE load_data_audit_trail_dtl AS TYPE security_type IS TABLE OF SECUIRTY%ROWTYPE INDEX BY PLS_INTEGER; security_type_var security_type;
I wrote function Quantity(p_item_number in varchar2)RETURN NUMBER, i called This function in POST_QUERY ,Error like this "wrong number or type of arguments in call to Quantity", i tried like as " Quantity(p_item_number in varchar2)RETURN NUMBER" , but it gives an error "encounterd the symbol VARCHAR2 when expecting one of the following ( "..
I am getting the below error while trying to refresh the materialized view:
BEGIN DBMS_MVIEW.REFRESH('TOP_MVIEW','C'); END; * ERROR at line 1: ORA-06550: line 1, column 9: PLS-00306: wrong number or types of arguments in call to 'VERIFY_LOG' ORA-06550: line 1, column 9: PL/SQL: Statement ignored ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429 ORA-06512: at line 1
When My C# program executes the cmd.ExecuteNonQuery(), the following exception is thrown:
[System.Data.OracleClient.OracleException] = {"ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'VALIDATE_PATIENT_NEW' ORA-06550: line 1, column 7: PL/SQL: Statement ignored "}
Here is my Stored Procedure:
CREATE OR REPLACE PROCEDURE VALIDATE_PATIENT_NEW ( P_LAST_NAME IN ogen.gen_m_patient_mast.last_name%TYPE, P_FIRST_NAME IN ogen.gen_m_patient_mast.first_name%TYPE, P_DOB IN OGEN.GEN_M_PATIENT_MAST.BIRTH_DATE%TYPE, -- timestamp DEFAULT NULL, c_dbuser OUT SYS_REFCURSOR
I'm using an existing stored procedure in my C code. The stored procedure in question has been compiled and is proven to work without any errors. However, when I use the same in my C code, its failing with the above error.
The Store procedure definition looks like :
CREATE OR REPLACE FUNCTION SP( srq_id integer , unid IN SPkg.arr_parmid, parm_typ IN SPkg.arr_parm_typ,
[code].....
Type definitions
TYPE arr_parm_typ IS TABLE OF char INDEX BY BINARY_INTEGER; TYPE arr_parmid IS TABLE OF tbl_parm.UNID%TYPE INDEX BY BINARY_INTEGER; TYPE arr_parm_lbl IS TABLE OF tbl_parm.PARM_LBL%TYPE INDEX BY BINARY_INTEGER; TYPE arr_parm_vlu IS TABLE OF tbl_parm.PARM_VLU%TYPE INDEX BY BINARY_INTEGER; TYPE arr_vlu_hint IS TABLE OF tbl_parm.VLU_HINT%TYPE INDEX BY BINARY_INTEGER;
I'm trying to use MULTISET UNION to append several collections into a single recordset.The select queries shown for the CURSOR are simple beta versions of the real queries which have about 350 fields to each of them. I will be appending data from 15 of these queries which each will with no more than 20 records per query into a new single recordset (not sure if 'recordset' is the correct phrase or term for what I mean, it could be ARRAY, OBJECT, COLLECTION or something else all together).
Here is text of the ERROR message:
ORA-06550: line 63, column 1: PLS-00306: wrong number or type of argument in call to 'MULTISET_UNION_ALL'
ORA-06550: line 62, column 1: PL/SQL: Statement ignored
ORA-06550: line 71, column 36: PLS-00487: Invalid reference to variable 'VARCHAR2'
ORA-06550: line 71, column 5: PL/SQL: Statement ignored
I think the error has to do with some defect in my declare statements.
DECLARE MyTID varchar2(10);
CURSOR Cursor_rst1 IS SELECT d_owner_internal_id, d_internal_id, d_tid, d_entity_name, d_form_seq FROM rtns.itas_rtn_ct_1120_cor tblRecords WHERE d_form_seq = '2710' --Tax Year =2003 AND D_TID = MyTID; [code]....
The OUI threw the subject error during installation of Grid Infrastructure 12.1.0.1 on OEL 6.4 with Job Role Separation. This occurred after successfully running root.sh when the OUI started the NETCA task . The solution was very simple: go to /u01/app/12.1.0 and "chmod g+w grid". At that point I was able to click "retry" and it worked perfectly. There were no other errors or issues during the entire installation. Just passing it along.
I have an issue trying to execute some queries using a dblink. When i run any query with numeric fields only display 4 digit and int the source database the fields have 5 digit. The dblink work between ans MSSQL database to an Oracle Database
Example: MSSQL select cardnumber from card cardnumber 19121 19122
Oracle (with dblink) select cardnumber from card@dblink1 cardnumber 1912 1912
i want to insert unique number with out gaps in a col of a table every time my query runs . it shouel generate numbers from 1 to n. I can do it using sequence , but sequence need reseting and other user can reset it also and it creats gaps too.
Any function/technique which can give me session or transaction specific unique number on each call to sp.
i want to inserting these numbers in a table and insertion is going on in a loop.
insert into call values(1,9818764535,9899875643,'IN','24-APR-13 02:10:43',10); insert into call values(1,9818764535,9898324234,'IN','24-APR-13 05:06:78',10); insert into call values(1,9818764535,9215468734,'IN','24-APR-13 15:06:78',10); insert into call values(1,9818764535,9899875643,'OUT','25-APR-13 01:06:78',10); insert into call values(1,9899875643,9899875643,,'OUT','25-APR-13 22:06:78',10);
Query : need to find first and last call of '9818764535' mobile number and of call_date between '24-apr-13' and '25-apr-13';
I'm running a C++ program to call sqlplus to execute some sql scirpts. The program will accept arguments from users at the command line, and execute the script which the name will also be passed in as an argument to the program eg:
./MY_PROG.sh ABC.sql 23 (MY_PROG will call ABC.sql script and pass 23 as an argument to ABC.sql)
it works fine when the argument is passed in correctly, and my ABC.sql scirpt is able to execute correctly, however when the argument is not passed in, the program just hangs there, waiting for an input from the users. This is because "&1" in my script is expecting some value from users.
Because this program will be scheduled to run, and no one will be there to monitor the job, if so happens arguments were missing, the program will wait there for the entire night. Is there any way that I could make the program or the script to exit when there is no input to be found? I can't use timeout as I do not know how long does the script take to finish it operations, I could be updating millions of record from a script.
But when I substitute the val1 to the field, the query executing in the sql prompt is not coming out at all. May I know how to pass and use values from command line to a pl sql block.
I would like to know if it is possible to get the arguments of a function (or procedure), in the same way as - for example - the "arguments" object in JavaScript.
I have seen the table ALL_ARGUMENTS, for example, that is providing a lot of interesting details, but I still miss the most important for me: the values of the arguments, not only the name, or type, etc...
Something that could be called as soon as the function (or procedure) is run, at the beginning of its process, and that would give a kind of array of arguments values.
How I could pass list of arguments passed to a pl/sql block in a generic way without knowing their names in advance? I mean that in machine languages you could just get the stack dumped. In PERL you would access @_.In Oracle I could use AWR to extract values bound to a query using system views but what about PL/SQL code?
Let say that I have abstract method:
create package p is procedure p(...) is begin <<here I'd like to dump all the arguments passed to my procedure without knowing what "..." is>> end p; end p;
I am using ORACLE SQL developer.. I am trying to schedule a package to run daily..here is the overview of my package.. ----- create or replace PACKAGE BODY xxx_MTO_yyy AS PROCEDURE yyy_mto (p_message OUT VARCHAR2, p_detail OUT VARCHAR2, p_value OUT VARCHAR2) IS XXXXXX CXXXXXX XXXXXXX END yyy_mto; end xxx_MTO_yyy;
Now I created schedule as shown (The sql is processed)
begin dbms_scheduler.create_schedule (schedule_name => 'MTO_DAILY', start_date=> trunc(sysdate)+6/24, repeat_interval=> 'FREQ=DAILY; BYDAY=MON,TUE,WED,THU,FRI,SAT,SUN; BYHOUR=22;', comments=>'Runtime: Every day (Mon-Sun) at 6:00 ); END;
Now I am creating SCHEDULER PROGRAM as shown (sql processed)
begin dbms_scheduler.create_program (program_name=> 'mto_DATA', program_type=> 'STORED_PROCEDURE', program_action=> xxx_MTO_yyy.yyy_mto', enabled=>true, comments=>'Procedure to collect session information' ); end;
Now i am creating the scheduler jobs as shown (here also the sql processed)
a) the job should have been visible under the "jobs" tab in sql developer. I dont see that. b) When I tried to run the job manually using ********** (BEGIN DBMS_SCHEDULER.RUN_JOB ( JOB_NAME =>'STR_DATA' ); END;
it failed , saying that "ORA-06553: PLS-ORA-06553: PLS-306: wrong number or types of arguments in call to 'yyy_MTO'". When defining the "dbms_ scheduler. create_program" object , how can I define the arguments?. My procedure has 3 variable out arguments?
Ive just been trying to create an add member procedure to retrieve an object that is in another table. But before i get the ref to bring the toy across i wanted to make sure i could insert an object into the new table. I keep getting theres too many arguments, the lack of sqlplus code, the spool function isnt working.
DROP TABLE completed_toys; / CREATE OR REPLACE TYPE comp_toyobj AS OBJECT ( completed_id NUMBER(5), request_id REF toy_obj,
[Code].....
Here is the error on the procedure call
Error report: ORA-06550: line 4, column 9: PLS-00306: wrong number or types of arguments in call to 'ADD_COMPLETED' ORA-06550: line 4, column 9: PL/SQL: Statement ignored 06550. 00000 - "line %s, column %s: %s" *Cause: Usually a PL/SQL compilation error. *Action:
Recently i have faced the error ora-600[kcbgtcr_12]. oracle suggested in the note (5523799.8) to flush the buffer cache by executing below command. My database version 9.2.0.8
1) to flush the buffer cache: alter session set events 'immediate trace name flush_cache level 1'
is this command for flushing the buffer cache ? if so what will be the impact if we flush the buffer cache ?
I have an issue with rather complicated function.Basically it is using DBMS_SQL to execute a very long statement with many parameters (~6000 of them) and binding them with DBMS_SQL.BIND_VARIABLE. Variables are called :1,:2,...,:6000.
When this arguments set is too large - I am receiving error "ORA-00939: too many arguments for function".
Currently I am thinking about dividing the query into subqueries and executing them all with performance decrease.
i have oracle database 10g with RAC. Before this, we upgrade our storage and completed the process. After bring up our database and it's ok.
But the problem is, when i try connect our database using ODI then database hang and i got error closed connection. When i checked details in alert.log, i got error - ORA-00600: internal error code, arguments: [4097], [], [], [], [], [], [], [].
After googling a lot, I really don't know what may have caused this problem when I'm shutting the DB,I'm running oracle on version 10.2.0.3.0 on Win Server 2003 Enterprise SP2.
Part of the alert.log:
Mon Sep 26 07:00:49 2011 Starting background process EMN0 EMN0 started with pid=27, OS id=5192 Mon Sep 26 07:00:49 2011
[code]...
Part of the file teste_ora_5000.trc:
FREELIST CHUNK COUNT:3192 OBJECT SIZE:36 LATCH:1 TOTAL SPACE: 114912 FREELIST CHUNK COUNT:3190 OBJECT SIZE:36 LATCH:2 TOTAL SPACE: 119016
I have two Oracle instances, both are 10.2.0.3..Executing the following results in two different results:
select N'Test" "result" from dual;
On one the output is: resu ---- Test
and on the other the output is
result ---------------- Test
This seems to suggest that one is returning "Test" as a char(16) and the other as a varchar2 or nvarchar2. In both cases, NLS_CHARACTERSET is WE8ISO8859P1 and NLS_NCHAR_CHARACTERSET is AL16UTF16.
Not being an Oracle DBA, I am not sure where to look.
I read about many indexes as B tree index, function based index,Bitmap Index etc.how many types of Index are there in Oracle and what are they? wat are the categories and sub category? when to use what?
