what is meaning for port number,in listener.ora file associated with ? is there any difference for port number in windows & in linux server.,?
View 3 Replies i have a listener configured on default port 1521 and i wanted to change it. i did following:-
1. stop the listener through lsnrctl stop
2.change the port number in tnsnames.ora and listener.ora and save both files.
3.now i start the listener as lsnrctl start
4.it started successfully but saying that it cannot register to instance.
5.i connect sqlplus / as sysdba and execute "Alter system register" and "System Altered"
but even then the listener is not registering.
i am trying to chnage the default port number of listener but facing problems in instance registration. i did as follows:
1. stop the listener as lsnrctl stop (default listener).
2. chnage the listener.ora and tnsnames.ora with desire port numbers (1526) as follows:-
[code]
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
[code]...
but i didnt get the reason of aforsaid error and my instance is not registering
I have configured oracle listener at Non-Default port 1526.
Is it mandatory to mention LOCAL_LISTENER parameter at pfile?
LOCAL_LISTENER='listenerr_alias'
In one of our RAC envrionment, we have more than 15 databases in a server running in AIX Operating system.the Listener file I am able to find only one entry (SID). But while trying to execute lsnrctl status it displays all the 15 SIDs in the list hosted in the ser ver. Not sure how it works?
As we created another one new database in the database, where i need to add this SID in the listener.ora file to reload the listener.
i want to online my oracle 10g database but when i make connection string then i don't know what the port i set. I set default port 1521 but it not work on client site .
View 4 Replies View RelatedI am using oracle 11.2.0 in linux platform.i have created a listener for the asm database. and i am using non default port of 1525 whenever i go for lsnrctl>status always shows for the port 1521. i don't want the default port 1521 and i have changed the local listener as listener1 with port 1525 protool tcp in spfile and registered with the asm database.Is there any option to change the default listener as listener1.
also,everytime when i give lsnrctl>show current_listener it is showing "listener"
i have set the current-listener to listener1 and save_config listener1 and reloaded.After exit and enter lsnrctl>status it will show for port 1521 When i attempt to start listener1 every time. it will prompt listener1 is already running.
Is it possible to change oracle's standard port 1521 ?
View 1 Replies View RelatedI have local development Oracle 9i database in my Windows XP. I see it uses TNS Listener port 1521. For some reason it must be using port 8080 also or in the background because it seems to not let my local web container (Apache Tomcat which uses Port 8080) on the same workstation work when it (TNS Listener) is turned on. how I edit the Listener port number and if I do change the port number what other things do I need to change such as the OEM login settings to the local database
View 1 Replies View RelatedI have a problem: Oracle is working on port 8080 used by tomcat. Then two applications are conflicting.
View 2 Replies View RelatedENV: Oracle 10gR2, RHEL 64bit on ASM (10gR2):
Current listener port is 1521. I have been asked to change it to 10526
I tried changing the port number in the listener.ora file and then restarting the listener but the I start getting "ORA-12541: TNS: no listener" error. If I change it back to 1521 and restart the listener, I am able to connect to the database. What else do I need to do to change the port #? After I change the port and restart, here is what I tried to test: $ sqlplus user/password@sid...ERROR:ORA-12541: no listener Enter user-name: When I rollback the port# change, I am able to login.
Which parameters are required in init file for 'Dynamic Listener Registration'? (for default port/ protocol). I understand that Local_listener is required only if we are using not default protocol, port.
Also which cases we need listener.ora file? I understand we need it for 'Duplicate Database' using RMAN as well as for 'Data Guard'. what else will need it?
I am having a problem getting my listener to start.
[oracle@jhlinux ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 01-MAR-2011 23:26:30
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/jhlinux/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jhlinux.home.com)(PORT=1521)))
[code]...
How many listener we can have in one database? How many users can be support by one listener?
View 3 Replies View RelatedI have installed on my local machine the Ora 11 XE server and the client. Its okay. I can logon from the OAS normally.
However, when I try to connect from my Php application, the messages that comes is: 'ORA-12154: TNS:could not resolve service name'.
How to find out the listener password in oracle?
View 3 Replies View RelatedWhen i configure a listener using net manager,if found that the red text box in the picture can fill "the value of the global name " or "the value of the service_names".
View 7 Replies View RelatedI am done with my configuration for oracle HS to connect to SQLserver. When I tried to start my listener, it is giving the following errors.
-----------------------------------------------------------------
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:oracleproduct10.2.0db_1
etworkadminlistener.or
a
Log messages written to D:oracleproduct10.2.0db_1
[code]..
Contents of my listener.ora file are below
--------------------------------------------------------------
LISTENERSQLODBC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST=
[code]...
I just installed oracle 11g on a fresh RHEL 5.2 installation on virtual box.
The database is up, but the listener (LISTENER) hangs after a minute from starting it, and then any lsnrctl command just hangs without showing any error messages, when I restart the virtual machine and then start the DB and listener, it works for a minute and it hangs again!
I could not able to start the listener if i have named it other than the default name: LISTENER and the default Port:1521
if I name it list and port : 9999 it is throwing an error as
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 27-FEB-2011 13:02:23
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /oraeng/app/oracle/product/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /oraeng/app/oracle/product/11.1.0/listener.ora
Log messages written to /oraeng/app/oracle/product/11.1.0/log/diag/tnslsnr/server1/list/alert/log.xml
TNS-01151: Missing listener name, list, in LISTENER.ORA
Listener failed to start. See the error message(s) above...
Should i have to do some changes in sqlnet.ora for overriding the default settings?
Is it possible to bind an Oracle Listener on 2 different interfaces on the same host?
My initial situation: I've set up a new VLAN in eth1.8 on our database server. There are 2 Oracle instances on this host. One instance was set up for the new VLAN, this works fine. The other listener stayed in the old network, because an other customer also needs to access this instance.
Now the customer wo was set up for 2 new VLAN can't access the other instance listenig on the interface eth0.
In short I have the following setup:
customer1: eth0
customer2: eth1.8 (VLAN)
listener1: LST1
listener2: LST2
SSID1: SID1
SSID2: SID2
listener1 is listening on eth0 for SID1
listener2 is listening on eth1.8 for SID2
This works fine.
Now customer2 needs to access SID1, which is configured on eth0, but customer2 is configured for eth1.8
So I need a listener for SID2, that is configured for both interfaces eth0 AND eth1.8.
i have created a listener for my db and register the service to it some 2 years back now i have checked it and it display as follows
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 24-JAN-2012 13:49:44
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.x.x.x)(PORT=1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Start Date 24-JAN-2012 13:45:44
Uptime 0 days 0 hr. 3 min. 59 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
[code]....
now i have stop and then restart but same status? so how can i manually register it again or anyother solution as i cant run netmgr
I have a database up and running (including listener) on machine A. From that machine, everything seems fine. However, when I try to connect to it from another machine (say, machine B) on the network, the connection cannot be established (exact message: connection to database failed: The Network adapter cannot establish the connection).
I can successfully ping machine A from machine B. The machine A db is a default install (ORCL).
Is it possible the DB listener is not configured properly to connect to remote clients? On machine B, I have oracle tools such as SQLPLUS, Oracle Net Manager, and Net Configuration Assistant.
ORA-12518 Tns: Listener does not currently know of service
from application server using client 10g to connect our database.This problem happens only in application server and we tried from another server we can connect to database easily but problem only in application server.
this error since TNSNAMES and network are properly hosted since there no network disconnection betwwen database server and application server.
I just found out that the LISTENER I've creating with a password was with "-inherit" settings. Twice I succeeded in doing this, but it seems that it's not working when I tested it. Thus, I opted to get rid of it's listener.bak file and set the password again. Now I just can't stop it because of this error message: "TNS-01169: The listener has not recognized the password".
I've tried every passwords I made, and tried resetting it, but I'm not successful either, it's the same error message.My last option would be to restart the db Server (since the original listener.ora is already intact),
I have installed Oracle 10g in windows 2003 two times with two different homes. (D:oraclehome and E:oraclehome).Databases db01 and db02 created in these homes respectively. how to configure listener and tnsnames to aceess these databases.
View 7 Replies View RelatedI have set password on the listener and set the local_os_authentication parameter to "OFF", whenever i start/stop listener through "lsnrctl" ,it works fine and asks for password but i can stop/start listener through windows services without giving any password.
what is the use of setting password on listener if any body can start/stop it through services utility in windows xp sp3.
My database link to the remote database used to work fine until the company VPN was updated for some security reasons. Now When I try to connect using the DBlink now, error comes up:
TNS 12541 no listener.
Checked the actual listener on the remote database(destination) and it is up and running fine. I am able to ping their machine.
ping <remote host> -works fine
tnsping<remte host> -fails
it comes back with error
TNS 12541: no listener
Nothing has been changed on both databases. The destination database can connect to our database without any issues(they can tnsping and use the dblinks to our database).
LISTENER ENTRY:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
[Code] ......
None of the above should be the cause because there was no change been made on any of these.
I have a database named DBKNIT and my server name is USMSERVER, But i cant login to the PLSQL from my client PC , there is an error :
ORA-12514:TNS:listener could not resolve SERVICE_NAME given in connect descriptor
after creating database i try to start listener i have copied listener.ora and edit according to db created i have folling issues.
LSNRCTL for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production on 23-SEP-2011 15:02:05
Copyright (c) 1991, 2006, Oracle Corporation. All rights reserved.
Starting /u01/app/oracle/product/bin/tnslsnr: please wait...
TNSLSNR for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production
System parameter file is /u01/app/oracle/product/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.1.17.43)(PORT=1521)))
TNS-01155: Incorrectly specified SID_LIST_LISTENER parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
Listener failed to start. See the error message(s) above...