Networking And Gateways :: ORA-12535 / TNS / Operation Timed Out
Jan 2, 2013
I am trying to connect to a server from a client on another network. I am able to connect just fine if I am on that server, but when I try to connect from a client in my office to the amazon server, I get a timeout message as follows.
ora-12535: TNS:operation timed out.
here is my entry in my local tnsnames.ora file. I believe that the network is wide open between my two computers. o firewalls on the computers and the settings on my cisco allow this to go through. I see the client connect in log files on the server, but it always gets a timeout after 20 seconds.
I have tried to add these parameters to the sqlnet.ora file.
SQLNET.SEND_TIMEOUT= 120
SQLNET.RECV_TIMEOUT= 120
SQLNET.EXPIRE_TIME = 120
SQLNET.INBOUND_CONNECT_TIMEOUT = 120
RDCTEST2.rdcamazon.com =
[code].....
How would I go about debugging this? I replaced the ip with x's since this is a public post.
client = windows xp
server = windows 2003 server
I am able to connect to a local database server from my client without a problem.
View 8 Replies
ADVERTISEMENT
Jan 13, 2013
I have two related questions:
Scenario 1:
1. I have two remote Windows machines with database on each. One is Win 2003 Server (machine A) and another one is Win XP (machine B)
2. I can ping from A to B.
3. I can ping from B to A.
4. I can tnsping from A to B.
5. I CAN'T tnsping from B to A.
6. Windows Firewall on both machines are off.
What could be possible reason for point# 5?
Scenario 2:Now, the second part:
1. I had an unwanted entry in tnsnames.ora on B which I removed.
2. Then I restarted the listener on B. Actually, I wanted to restart the one on A to check if that resolves issue mentioned in point# 5 above.
3. I tried tnsping from A to B but suprisingly it is also giving "operation timed out" error now. So now tnsping not working from either sides.
I didn't make any changes in listener.ora on B, just stopped it and started again. Only change made was removing unwanted entry in tnsnames.ora on B.
Why does that affected database connectivity from A to B which was working fine previously?
NOTE: The two machines are connected through VPN using LogMeIn Hamachi. Hamachi assigns it's own IP address to each machine. Machine A is Windows Server 2003 and B is Windows XP.
View 3 Replies
View Related
Jul 26, 2005
I have a windows XP server with Oracle 9i on it, when i tried to connect this server from another win XP machine after creating a service. I m getting an error
TNS-12535 TNS:operation timed out
But as i know this error is related to CONNECT_TIMEOUT and it is now obsolete in 9i( am i correct ). I tried it doing from 2 machines but got the same error from everywhere so it means that the problem is with the server.my files are :
Listener.ora
# LISTENER.ORA Network Configuration File: D:oracleora92NETWORKADMINlistener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Tarun)(PORT = 1521))
)
[code]....
View 9 Replies
View Related
Jun 26, 2012
One of our production database we are getting error "TNS:operation timed out" from unknown port in alert logfile. Need to check why TNS error is occurring to these unknown port as our listener is running on default 1521 port. Also to inform that host=192.191.118.24 itself is the same database hosting server IP.
TNS-12535: TNS:operation timed out
TNS-12535: TNS:operation timed out
ns secondary err 12606
ns secondary err 12606
nt main err 0
[code]......
View 3 Replies
View Related
Apr 26, 2013
Frequently getting below error in alert log file. to sort out this issue.
Database: Active standby database
OS: Windows Server
Db Version: 11.2.0.2
Error:
***********************************************************************
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.2.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.2.0 - Production
[code]...
View 1 Replies
View Related
Jun 19, 2013
SQL*Plus: Release 11.2.0.3.0Solaris 10 SPARC I get the following error when trying to make an HTTP request. Below is the snippet of code I run. I get the error after exactly 60 seconds(default timeout?). The problem does not exist in the rest of our environments, only our test environment.
DECLARE
p_mid_tier VARCHAR2 (500);
responsestr VARCHAR2 (500);
BEGIN
[code]...
View 3 Replies
View Related
Feb 21, 2010
I want connect mssql in oracle by orale Gateways 11g
my environment:
windows Wista
oracle 11.1.0.7.0
Oracle Database Gateways 11.1.0.7.0
SQL SEVER2008
these soft in one computer.
my steps :
1. set initdg4mssql.ora
2.set listener.ora
3. set tnsnames.ora
4.start lsnrctl
5.use SYSTEM/ORACLE@DZCDB
logined. create dblink and test.
but it's error. i want to know where is the error.
View 1 Replies
View Related
Jun 26, 2013
I am working on people-soft, currently i am installing it but i found this error
ORA-12154: TNS:could not resolve the connect identifier specified
/*---------------------------------------------*/
this is listener.ora
# listener.ora Network Configuration File: C:oracleproduct10.2.0db
etworkadminlistener.ora
# Generated by Oracle configuration tools.
HRCS9 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = umhs-86cd1970f)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
)
)
SID_LIST_HRCS9 =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:oracleproduct10.2.0db)
(PROGRAM = extproc)
)
)
/*---------------------------------------------*/
tnsnames.ora
# tnsnames.ora Network Configuration File: C:oracleproduct10.2.0db
etworkadmin nsnames.ora
# Generated by Oracle configuration tools.
HRCS9 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = umhs-86cd1970f)(PORT = 1521))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
/*----------------------------------------------------*/
sqlnet.ora
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
/*--------------------------------------------------------*/
View 1 Replies
View Related
Oct 8, 2012
I have one production server with oracle 11g R2 DB. I have to change Server Hardware and thats why I have to install oracle 11g R2 DB on New hardware and test it. I had installed DB with software only option and copied the cold backup of production server. The hostname and ip address of both the servers are different. I had change the "db_domain" parameter into init.ora with the hostname.Now my question is that can the same db runs on the same network with different hosts. Change of "db_domain" parameter into the init.ora is enough or i have to follow some other procedure.
View 12 Replies
View Related
Jan 24, 2005
I´m working with Oracle 9.2.0 / HP-UX and I need to configure two different listeners for the same server using different IP address.
View 12 Replies
View Related
Jul 5, 2012
I am trying to create a database link from the 11g database to the 10g database using:
create database link ORCL10R2 connect to <username10g> identified by <password10g> using <db10g>;
It Returns
Database link created.
select sysdate from dual@ORCL10R2 returns error:
ERROR at line 1:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
what changes I need to make to tnsnames and listener at both servers.
View 8 Replies
View Related
Dec 12, 2011
How to change listerner.ora name ? I want to have something like that application.ora instead of listener.ora.
View 9 Replies
View Related
Nov 2, 2011
I installed Oracle Express on my Windows 2003 Enterprise server. And right off the bat I cannot connect to it via command line. I have googled and read many sites, but am still getting the same error, no matter what I do. I am newbie again (was a DBA in 1990...when I used to have the same error and fix it in seconds...not sure why this problem still lingers in Oracle) so most likely I am overlooking something. Below are my tnsnames.ora and liserner.ora files
tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = myservername.domainname.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)
)
[code]....
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
View 19 Replies
View Related
Mar 28, 2011
My client get the error Ora-12514 when he tries to connect to the db.Well;
1) we restart the services: "OracleServiceOrcl" and listener but nothing changes
2) We restart the server and nothing changes
3) We checked the dump and he was done on March,26th. No db export yesterday. Is there any link with the clock change of this week-end (location of the server: France)?
4) The lsnrctl services listener command run successfully but it doesn't mention the instance ORCL.
View 12 Replies
View Related
Apr 11, 2012
Im planning to install OID. I will use it for Oracle Net name resolution and Enterprise User Security.
How is this product licensed? Is it included in a enterprise rdbms license?
View 2 Replies
View Related
Jul 13, 2010
I have an Access DB which I'm using to connect to an Oracle DB at work. There are several Oracle DB's that I can connect to using Access but this one I'm not able to connect to. I get the Oracle error ORA-25153 Temporary Table Space is empty.
I don't have the ability to make changes to the Oracle DB only to read and query.
View 1 Replies
View Related
Jul 5, 2012
When I run the below query, the session got the below errors exactly after 1 hour. I checked profile, resource limit, and sqlnet.expire_time. The SQLNET.EXPIRE_TIME value is 10. Except expire time there is time limit in profile and resource. I dont know how this session is losting connection exactly after 1 hour. What could be the issue here and what else need to check it?
14:34:09 SQL> << DELETE query >>
ERROR:
ORA-03114: not connected to ORACLE
DELETE FROM amsoftinstall
[code]...
SQL> select * from V$RESOURCE_LIMIT;
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_ALLOCATION LIMIT_VALUE
------------------------------ ------------------- --------------- ---------------------------------------- -------------------------
-------
processes 37 49 150 150
sessions 44 56 170 170
[code]...
SQL> select * from USER_RESOURCE_LIMITS;
RESOURCE_NAME LIMIT
-------------------------------- ----------------------------------------
COMPOSITE_LIMIT UNLIMITED
SESSIONS_PER_USER UNLIMITED
CPU_PER_SESSION UNLIMITED
[code]...
View 1 Replies
View Related
Aug 23, 2007
I'd got this error, TNS-12542, address already in used on my multithreaded application.
After finding some documents about this error, it happen because other application used same port as my listener. But i'd assured that only my listener, but it didn't happen in the first running process, but after some processes (hundreds of processes).
View 4 Replies
View Related
May 29, 2012
what is ISP concept in Oracle10g???
View 2 Replies
View Related
Sep 22, 2011
I am facing a issue on DBCA Installation, when i tried from off-shore.
a. When Iam connecting a server using production / Model VPN , and try to start Installing DBCA Using X11-Forwarding of putty,
b. DBCA installation Started but its tooo Slow, it takes more than 3Hrs (Started at 9AM and ends at 11.17AM)
c. First time it fails and second time its went to success, Whereas when i take alog of server ping request - I am getting a frequent "Requested time out" due to network fluctuation.
So let me know is the network fluctuation affects the Installation through VPN, if So how to overcome and is any workaround on that ?
View 4 Replies
View Related
Jun 6, 2011
We're deploying a new product release however this build uses Oracle 11G. We want to perform a side by side install for testing purposes. These are low usage systems so installing another Oracle build will not hinder the system.
We intend to test for a couple of weeks and migrate data, then uninstall the 10G. I'm in the process of installing 11G now, the 10G is up and running. I don't want to impact the 10G install. I'm installing 11G in /home/oracle/oracle11G directory. I would like to use 1 Listener.ora file. I've broken down the install bellow.
10G
SID "processing"
Oracle home /home/oracle/oracle10g
/mnt/Oracle/Oracle10GData
/mnt/Oracle/OracleRedoLog
11G
SID "processing11G"
Oracle home /home/oracle/oracle11g
/mnt/Oracle/Oracle11GData
/mnt/Oracle/Oracle11GRedoLog
I've copied the listener.ora file bellow.
LISTENER_PROCESSING =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST= X (PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.1.1.2)(PORT = 1521))
[code].......
LISTENER_PROCESSING2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = X (PORT = 1522))
[code]......
Do I need to specify the databasename for Processing2? Also the front end boxes (managers) are two different servers so Processingweb1 and processingweb2.
View 1 Replies
View Related
Mar 11, 2013
I want to connect ORACLE-11gR2 that is on linux with an MS sql server. DO i need to use some third party drivers like easy soft ? Can i configure the database gateway without any third party drivers ?
Secondly if my oracle is on linux, can i configure the gateway on a seperate windows machine(that will connect to linux oracle and ms sql server) as i have found the gateway installation setup only for windows version.
View 3 Replies
View Related
Mar 12, 2010
I would like to implement connect time fail over from my JDBC thin client. The client will try to first connect with dedicated connection mode, if the connection time crosses more than two seconds, then connection will be opened with shared mode. To implement this, I have put the following connection string in my JDBC URL. I am able to connect to database with this URL, however it seems fail over does not work. Is it because, my database listener is not configured with dynamic service registration. If I implement the dynamic service registration, is fail over going to work? Note, I want to fail over in the same database instance but with different listener.
(DESCRIPTION_LIST =
(FAILOVER = TRUE)
(LOAD_BALANCE = FALSE)
[Code].....
View 11 Replies
View Related
Jan 3, 2012
Which parameters are required in init file for 'Dynamic Listener Registration'? (for default port/ protocol). I understand that Local_listener is required only if we are using not default protocol, port.
Also which cases we need listener.ora file? I understand we need it for 'Duplicate Database' using RMAN as well as for 'Data Guard'. what else will need it?
View 4 Replies
View Related
Nov 25, 2010
We had an escalation wherein one of team members accidentally deleted an LDAP entry for a database. We use Oracle Net Manager to add/delete the connect descriptor.
Are there any logs using which we can find out as to who deleted the entry.
View 1 Replies
View Related
Mar 10, 2012
We installed new SSL certificate on Oracle HTTP server and getting an error in IE 6,7,8:
res://ieframe.dll/dnserror.htm#https://...
Examining http headers provide following error description:
ERROR_INTERNET_SECURITY_CHANNEL_ERROR.
How was it resolved?
View -1 Replies
View Related
Mar 1, 2011
I am having a problem getting my listener to start.
[oracle@jhlinux ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 01-MAR-2011 23:26:30
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/jhlinux/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jhlinux.home.com)(PORT=1521)))
[code]...
View 36 Replies
View Related
May 30, 2010
How many listener we can have in one database? How many users can be support by one listener?
View 3 Replies
View Related
May 26, 2010
I get this error when I try to connect to this database service as another user. I can connect to it as sys without any problem and the database is up.
And when I check to see whether the listener is running for that service, using lsnrctl status command, it shows that the service is UNKNOWN. What does this status mean?
> sqlplus usera/password@prod
SQL*Plus: Release 9.2.0.5.0 - Production on Tue May 25 14:50:35 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect
descriptor
/home/oracle> lsnrctl status
LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production on 25-MAY-2010 22:56:22
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=xxx)(Port=1521))
STATUS of the LISTENER
[code]....
View 8 Replies
View Related
Nov 4, 2010
I have a really strange problem connecting from a new client to an Oracle server, here are the points :
- There is no problem with DB server and its listener and all that as I am able to connect from other clients
- I have installed the oraclient on this machine ( it is a XP machine ) and copy/pasted the TNSNAMES.ORA from one of those correct PCs here and when I do a TNSPING is returns OK
- even when I open oracle net manager I see the TNS entries in there and when I test a connection thru it is says successfull
- BUT WHEN I USE SQL+ or TOAD or ODBC ( any of these) trying to make a connection using the exact same TNS entries it returns :
"ORA-12154: TNS:could not resolve the connect identifier specified"
- I have tried with both IP and Host name but no luck
- TNSNames.Ora and sqlnet.ora both are located here : oracleproduct10.2.0client_1NETWORKADMIN
- there is just one oracle home
- I have already uninstalled/installed oracle client
- These lines are included in Sqlnet.ora :
SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES)
I marked those entries in Sqlnet.ora and that made no diff in result, another thing : if I use easy connect method : sqlplus scott/tiger@<Servername>:1521/ORCL it does connect but using TNSNames still I can not get connected. so strange!!, seems somehow the TNS file even is not being picked or looked at !
View 2 Replies
View Related
