"SELECT xmltype(RCATT).extract('/JASON/RCA/SUB_PROBLEM_TYPE').getStringVal() as SPT, xmltype(RCATT).extract('/JASON/RCA/SUB_ROOT_CAUSE').getStringVal() as SRC, xmltype(RCATTT).extract('/JASON/RCA/ELABORATION').getStringVal() as ELA, xmltype(RCATT).extract('/JASON/RCA/PREVENTION').getStringVal() as PRE FROM table"
Above is my select statement
some explanation: the above select statement is to select the child node inside the xml content. But the child note contains some special character "<>" that illegally in xml.
Below is my xml content for the node of sub_problem_type
<JASON> <RCA> <SUB_PROBLEM_TYPE> For <FS_PLS_WAIT>, it is appeared in both valid and invalid password entered case but in requirement, only valid case has stated the display of <FS_PLS_WAIT>. This is the legacy radio behavior. </SUB_PROBLEM_TYPE> </RCA> </JASOn>
The result will generate the following issue.
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00225: end-element tag "ELABORATION" does not match start-element tag "FS_PLS_WAIT" Error at line 10 ORA-06512: at "SYS.XMLTYPE", line 301 ORA-06512: at line 1
I wish to know where can i by pass the checking for special character.
oracle PL/SQL. I have almost finished this xml parsing task but their is one problem. Actually in our table there are more than 70-80 columns & due to that only I don't want to put the hard coded column name in my procedure, because if I will do that, the unnecessary procedure size will be increase(means line of code).Here is our procedure
Create or replace procedure loadMyXML(dir_name IN varchar2, xmlfile IN varchar2) AS l_bfile BFILE; l_clob CLOB; l_parser dbms_xmlparser.Parser; l_doc dbms_xmldom.DOMDocument; l_nl1 dbms_xmldom.DOMNodeList; l_nl2 dbms_xmldom.DOMNodeList; l_n dbms_xmldom.DOMNode; node1 dbms_xmldom.DOMNode; l_colName VARCHAR2(100); [code]...
i dont have access to any Oracle XML related pacakges, however I have to pull the data from the following xml.Eg: The alternativeIdentifier.Name should be a column and the value should be the data for the column. Same applies to other tags under characteristics tag.
XML has a parent element Interaction and each Interaction has different elements like Consumer, Campaign, Response, Survey, MultiSuppressions. Now i need to insert Consumer element data into table1, Response and Campaign elements data into table2, Survey data into Table3 and Multisuppression data into table4 with interaction number (this can be rownumber) so that i can link all the tables based on interaction number.
I googled on parsing xml and found xmltable can be used to parse xml. I wrote below procedure, but it will not work if i include MultSuppressions (will get cartesians).
I have used jaxb (used xjc.exe ) to parse a XML schema file.However after the class files were generated,one of the setter method is missing.Is it possible that this can happen or have i done something wrong.
The classes that got generated are (snippet of it) public class Shiporder { @XmlElement(required = true) protected String orderperson; @XmlElement(required = true)
We are in process of Migrating our database from Oracle 9i to Oracle 10g.
I am getting below error while parsing XML in 10g.
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00601: Invalid token in: '//soap:Envelope/soap:Header/coHeader/company/text()'
Same code works fine in Oracle 9i database with same XML. Is there any difference in XML TYPE functionality in Oracle 9i and 10g?
When I try to extract the date tag value from XML data, the time stored in 20120602153021 format i.e., YYYYMMDD24HHMISS format. The following statement extracts only date as 02-JUN-12 however do not extract the time part.
If I try the same in SQLplus with to_date it works however fails in PL/SQL.
XML data: <?xml version="1.0"?> <RECORD> <REGTIMESTAMP>20120601130010</REGTIMESTAMP> </RECORD>
PL/SQL Extract:
CURSOR c_xml_record IS SELECT extract(value(d), '//ACTIVATIONTS/text()').getStringVal() AS REGTIMESTAMP, FROM t_xml_data x, [code].......
SQL> SELECT * FROM NLS_DATABASE_PARAMETERS where parameter = 'NLS_CHARACTERSET'; PARAMETER VALUE ------------------------------ ---------------------------------- NLS_CHARACTERSET AL32UTF8 SQL>
There is table (VIN_TEMP) in my company database containing following records. It seems like this table should contain some greek language special chracter values instead of this weird data.
Client are reporting these records as invalid and requesting us to fix. As i investigated i found out, this table was created and loaded few year back. Client sent us one time files which we loaded into this table. I was able to find the code which was actually used to load this table, but unfortunately i was not able to find the raw files where we load this data from...
It seems like Previous Developer specified character set "UTF8" statement, in his sql loader script, to load this data. It seem those file contain some Greek language special character data which was not support by "UTF8" charater set and result in creating those invalid data. My Job is to fix these invalid records and convert them back to its original values which were present in the raw file. I tried to contact client and see if i can find out the raw files but no luck. I tried to use convert function as mention to convert this data from "UTF8" to our current character set format but no luck.
we have a Oracle 11g database, but it does not support UTF8 character set. Now we have received a file which contains records with Trade Mark symbol (special character). Now when we are trying to load the record, it is getting loaded with a sign "?". As a result when we try to display record in web application, the application is not able to show the records properly.
How to extract the data from XML using the xsd file. attached files.
Explanation: first check the EmailMessage tage from order_conf.xml compared with Email.xml(<xsd:element name="EmailMessage">) if exists then go to next node. EmailMessage(exists tag in order xml file) ->next <ns1:emailNotificationype> this tag should be follow under the EmailMessage tag(<xsd:element ref="emailNotificationype">) in Email.xml ->next <ns1:orderNotification> -> check this tag in <xsd:element name="orderNotification"> in Email.xml. -> next <ns1:templateFormatInfo> -> it should follow under <xsd:element name="orderNotification"> in Email.xml. -> next <ns1:templateFormatInfo> -> it should follow these tages <xsd:element name="templateFormatInfo"> <xsd:element ref="templatecode"/> <xsd:element ref="templateversion"/>
select dbms_xmlquery.getxml('select * from tbl_nm') from dual <?xml version="1.0" encoding="ISO-8859-1"?> <ROWSET> <ROW num="1"> <NAME>admin</NAME> <PASSWORD>a</PASSWORD>
[code]....
i tried to get this xml data in html table but the table was not displayed. When I changed the <ROW> tag into any other tag say <CD> the table was displayed.
how to use dbms_xmlgen to take the results of a query and convert it into a XML formatted data. But if a column (clob) contains data in an XML format, is there a way to query that column and easily parse the data? I know that I could write loops that do string searches for each of the XML tags and nested tags.
Our company database is Oracle based and we use SQL Developer to pull out needed data.Using a snippet borrowed from a co-worker, I have put together a query that, among other things, pulls a list value out of an xml clob field and displays it in the query results. My query as it stands right now is below, followed by an example snippet of the xml clob that I am pulling from. The reason for the "query within a query" is because the base query could return multiple entries and I only want the one with the most recent date.
select * from (Select Wtr_Service_Tag, Wtr_Tran_Origin, Wtr_Send_Date, Wtr_Receive_Date, to_char(substr(wtr_req_xml,instr(substr(wtr_req_xml,1,8000),'SID')+8,12)) Asset_Tag from ws_transactions Where Wtr_Service_Tag In ('20458749610') And Wtr_Req_Xml Like ('%CSM%') Order By Wtr_Receive_Date Desc) where rownum = 1; [code]....
This query is only able to pull the first value in the list.How can I edit this query to pull all of the list items when there are more than 1 (preferably concatenated into one column in the query results)? I have another field, in a separate table, that I can pull from to get the number of list items.
This one may be more complex. As currently written, the query pulls a fixed number of characters from the xml clob and either returns not enough data, or too much because the values I need to pull could be of varying lengths. I have no way to query what those lengths might be.
I need to get all rows where node <operationStatus> value as SUCCESS. I am running following query but it is returning null value insted of data of columns
SELECT a.MESSAGECONTENTS.extract('/clHeader/msgName/object/msgType/sender/senderInstance/operationStatus/text()').getStringVal() FROM Table_xml_tmp a WHERE a.MESSAGECONTENTS.extract('/clHeader/msgName/object/msgType/sender/senderInstance/operationStatus/text()').getStringVal()= 'SUCCESS'
I have two separate databases, I want to send XML file contains a query from one to the other , that read query and return results to a first via XML file.
I have a requirement to extract data from an XML formatted string that is passed as an IN parameter to a database stored procedure. I do not have a table to store the XML, nor an XML schema, nor a namespace, just the XML string. While new to XML, I do understand the basics. Using XMLTable I am able to parse out the simplest of XML data. My problem is this; attempting to extract data from nested XML nodes results in the error
Testing a solution example I found on this site by Barbara Boehmer, I still get the ORA-19279 error. I suspect it may be because I have version 10g while she has version 11g. Her solutions is from #msg_514154. Here is that code that gives me the error:
SCOTT@orcl_11gR2> SELECT x."deptno" 2 FROM (SELECT '<departments><deptno>1</deptno><deptno>2</deptno></departments>' col FROM dual) xml_data, 3 XMLTABLE 4 ('/departments/deptno' 5 PASSING XMLTYPE (xml_data.col) 6 COLUMNS 7 "deptno" number path '/deptno') x 8 /
deptno ---------- 1 2
2 rows selected.
As I said, this example generates the ORA-19279 error. Need processing XML data from an IN parameter?
The data in the MESSAGE_DATA column contains text but also control characters that separate data elements in the message (i.e (char)31, (char)29) and (char)28) . What i am finding is that for some reason message.getString() is sometimes truncating the message. I can read the majority of messages but some of them are truncated. Am i supposed to be reading the data using a different method? If so how?
I have tried to use sqlplus to look at the data in the database and it is all there it is just truncated by the message.getString() method. I saw this when i tried to output the result i.e. System.out.println(message.getString()).
I ran an sql query using the length() function in Oracle and length("MESSAGE_DATA") returns 2032 whereas in java message.getString(1).length() returns 2000.
I'm trying to call a Java function from within a PL/SQL aggregation function with a (array of) complex data type.
a) basic definitions (work and are ok)
CREATE OR REPLACE TYPE eventtype AS OBJECT ( relevance NUMBER, bid1 NUMBER,tid1 NUMBER,prob1 NUMBER, bid2 NUMBER,tid2 NUMBER,prob2 NUMBER, bid3 NUMBER,tid3 NUMBER,prob3 NUMBER, bid4 NUMBER,tid4 NUMBER,prob4 NUMBER, bid5 NUMBER,tid5 NUMBER,prob5 NUMBER, bid6 NUMBER,tid6 NUMBER,prob6 NUMBER ); CREATE OR REPLACE TYPE eventtuple IS TABLE OF eventtype; /
b) The following call works (but is not exactly that what I want):
public class pcompDP { public static NUMBER probComputation(oracle.sql.STRUCT pin) throws java.sql.SQLException { ... } } create or replace FUNCTION pcompDPFunc(cin IN eventtype) RETURN NUMBER PARALLEL_ENABLE DETERMINISTIC AS LANGUAGE JAVA NAME 'pcompDP.probComputation(oracle.sql.STRUCT) return BigDecimal'; / SELECT pcompDPFunc(eventtype(5, 6, 0.3, 10, 20, 0.45, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)) from dual;
c) The following call doesn't work (but should have the intended semantics):
public class pcompDP { public static NUMBER probComputation(oracle.sql.STRUCT[] pin) throws java.sql.SQLException { ... } } create or replace FUNCTION pcompDPFunc(cin IN eventtype) RETURN NUMBER PARALLEL_ENABLE DETERMINISTIC AS LANGUAGE JAVA NAME 'pcompDP.probComputation(oracle.sql.STRUCT[]) return BigDecimal'; / SELECT pcompDPFunc(eventtuple(eventtype(2, 3, 0.234, 1, 1, 0.123, 0, 0, 0, 0, 0, 0, 0, 0, 0), eventtype(5, 6, 0.3, 10, 20, 0.45, 0, 0, 0, 0, 0, 0, 0, 0, 0))) from dual;
d) What's the error? Do I have to use JPublisher or is it possible without it? I guess an array should be possible without it.
The type of the parameter seems to be wrong. Question is whether in PL/SQL, Java or SQL.
I am trying to invoke program from my local Windows machine (exactly java executor, which is in my environment on c:javajdkinjava) using database package with Java stored procedure.
Everything is fired by SQLPLUS script, this script invokes package with Java stored procedure (jar loaded into Oracle) and that procedure is trying to invoke runtime process (syntax:
c:javajdkinjava -cp
and here ara my classes and main jar) using my local java executor. I added all permissions using dbms_java.grant_permisions (execution forced me to give permissions java.io.FilePermission to <<ALL_FILES>> for execute), moreover I added to my database user JAVASYSPRIV and JAVAUSERPRIV role. Unfortunately, beside this I am still getting error:
C:javajdkinjava not found (Note that lookup with PATH isn't done due to the oracle executable being setuid.)
I am writing a java stored procedure in my package. In the java procedure I want to issue a query to be fired on the user table from which I am calling the java procedure.
Some thing like following:
I am logged in to USER1 and my package is inside USER1. From this package I am calling the Java Stored Procedure. In java procedure I want to make a jdbc connection to USER2. The details of USER2(password, hostname,portno) are stored in a table called 'connection_details' and this table is in the USER1.
My problem is how can I issue the
SELECT details FROM CONNECTION_DETAILS for USER2
so that i can get the details..?
Do i need to first make jdbc connection to USER1 and then execute the above query for which i need similar details of USER1. How can i obtain the details of USER1 here.
I am thinking if I am already in USER1 then do I need to make the jdbc connection to USER1 and then execute the query?
