What is the optimal redo log size for the database and how many log files required if desired to enable archive log mode.what can be the value for fast_start_mttr_target..?i think if it this parameter set we can have redo log advisor for optimal redolog size.we have 2 redolog groups with 2 members each size of 1 GB. Will it degrade db performance..?
Database version 11.1.0.7
Oracle apps R12
OS : Linux Redhat 5.5
I look after a database that contains GIS mapping data. We do not use Oracle Spatial - it's just a plain Oracle Standard DB. It is running in Noarchivelog mode (I know - it's not a good idea, but will be sorted when our new Sun T4-1 arrives).
There are only a couple of users who actually edit data in the database, but about 100 simultaneous users who access it. In day to day use we have no performance issues. The DB has 3 50Mb redo log groups, and these switch about every hour or so during normal use.
Every few weeks we do a bulk update of our underlying map data. This involves putting about 4Gb of data into the database (which is about 15Gb in total). This takes about 5 hours and whilst I'm sure our old Sun v240 server lacking power is a substantial cause, I think the lack of redo space makes matters worse. Last time we did this, the system clocked just over 200 redo log switches in 5 hours. There were lots of "Checkpoint Incomplete" messages in the log file too.
The software we use to load the map data doesn't allow the data to be loaded with a nologging switch.
I could resize the redo logs, but if I size them for the update workload - 3x 500Mb - we'll have some days where we don't get a redo log switch at all. Is this necessarily a problem?
The alternative I'm thinking of is prior to performing this update, we add an extra redo log group with a 1Gb file, run the update, then remove the redo log group and delete the file afterwards. Is there anything wrong with this approach?
I want to re-size redo log group on my production database .i have 10 redo log groups of 50mb each having 2 members.i want 4 redo groups to be of 250 mb each having 2 members and then i will drop that old 10 redo log group(50 mb ) , so that i will have only 4 redo log group of 250MB each having 2 members.But i have physical standby and logical standby configured on production database .
find attached file for redo log configuration of production database(CBSPROD),Logical standby database(CBSMIS), Physical standby database(CBSDR).
regarding sizing undo tablespace and undo_retention parameter.we have to implement the database in production system with 40 users but how much space should be allocated to undo tablespace is there any propotions related to virtual memory and the
parameter.i have gone thru oracle doc's and some related sites.its an ERP aplications that contains 20 modules .I am an new one to this dba level
I'm trying to group sets of data based on time separations between records and then count how many records are in each group.
In the example below, I want to return the count for each group of data, so Group 1=5, Group 2=5 and Group 3=5
SELECT AREA_ID AS "AREA ID",
LOC_ID AS "LOCATION ID",
TEST_DATE AS "DATE",
TEST_TIME AS "TIME"
FROM MON_TEST_MASTER
WHERE AREA_ID =89
AND LOC_ID ='3015'
AND TEST_DATE ='10/19/1994';
[code]....
Group 1 = 8:00:22 to 8:41:22
Group 2 = 11:35:47 to 11:35:47
Group 3 = 15:13:46 to 15:13:46
Keep in mind the times will always change, and sometime go over the one hour mark, but no group will have more then a one hour separation between records.
I read that rownum is applied after the selection is made and before "order by". So, in order to get the sum of salaries for all employees in all departments with a row number starting from 1, i wrote :
select ROWNUM,department_id,sum(salary) from employees group by department_id
If i remove rownum, it gives the correct output. Why can't rownum be used here ?
Refer to the txt file to create table and insert data.
I executed the following query-
SELECT priority, detail, COUNT(1) FROM TEST GROUP BY priority, detail
and got the following result-
PRIORITYDETAIL COUNT(1)
StandardPatch 27
StandardInitial TSS 1
StandardInitial development 10
StandardProduction deployment5
High PriorPatch 1
Now I want that Initial TSS and Initial development should be combined as Initial together and I should get the result as follows:
PRIORITYDETAIL COUNT(1)
StandardPatch 27
StandardInitial 11
StandardProduction deployment5
High PriorPatch 1
what exactly redo log file contains.? whether they contained the ddl or dml statements or more than that.........?
View 1 Replies View Relatedhow would I be able to calculate the Redo rate for using in the Required bandwidth Formula as seen below :
Required bandwidth Formula ((Redo rate in bytes per second / 0.7) * 8) / 1,000,000 = bandwidth in Mbps
Example: 385 KB/sec peak rate would require an available network bandwidth of at least
((394253 / 0.7) * 8) / 1,000,000 = 4.5 Mbps.
SOURCE OF FORMULA Network Bandwidth Implications of Oracle Data Guard...I'm using Oracle 10g
tell me the advantages of using more than one redo log thread? Currently i am setup with 3 logfile groups and 3 members in each group.Ie
logfile group 1 ('/u01/oradata/pri/redo01a.dbf',
'/u02/oradata/pri/redo01b.dbf',
'/u03/oradata/pri/redo01c.dbf') size 30M,
group 2 ('/u01/oradata/pri/redo02a.dbf',
'/u02/oradata/pri/redo02b.dbf',
'/u03/oradata/pri/redo02c.dbf' ) size 30M,
group 3 ('/u01/oradata/pri/redo03a.dbf',
'/u02/oradata/pri/redo03b.dbf',
'/u03/oradata/pri/redo03c.dbf' ) size 30M
I wanna know if the redo log members are mirror copies.All member files from a same redo group have the same data?Are there any different in mirror or multiplex a file?
View 4 Replies View RelatedI'm using Oracle 10gR2 (10.2.0.4.0) 64 bits.
I got many times oracle ORA-00494 error and the database went down but since 29th of july the database have not been killed.
The error message is below :
ORA-00494: mise en file d'attente [CF] d�tenue pendant trop longtemps ( (more than 900 seconds)) par inst 1, osid 176484
ORA-00028: votre session a �t� ferm�e
My database is used for datawarehouse of many terabytes.
Initially the redo log size was 500Mbytes and I've set it to 3Gbytes. The maximum log switch is after 5 minutes. I want log to be switched every 20 minutes or every 30 minutes.
To obtain the size of redo logs I've executed this query :
SQL> select OPTIMAL_LOGFILE_SIZE from v$instance_recovery;
OPTIMAL_LOGFILE_SIZE
--------------------
54763
53,5 Gbytes is it not very big as redo log size? What's the maximum size of redo log? To set very big redo log size what are the requirements? Which precautions should I take before? What are the risks? Are any other ways to change the log switch frequency?
How can I disable redo generation for DML statements.
View 25 Replies View RelatedIs there any way to get the amount of redo generated in last 2 hour. which has below chareteistic
1. redo generated by currently connected session from last 2 hour.
2. redo generated by session disconnected during last 2 hour.
total_redo = disconnected sessoin during last 2 hour + connected session generating redo during last 2 hour.
is it Any way I can put the size of my redo log (During Install Oracle DB 11.1.0.7 )
I mean during installtion .??? becouse its by default 50 MB I need to be 200MB
Database version
SQL> select * from v$version;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Productionredo logs multiplexed.
[code]....
+ when the redolog 5 was archived how the archiving process works ?
let say both the log members are clean in case which one will be archived 5a or 5b ?
+ I can also see only one archive log is creating during log swtich
Redo log information can be transmitted in one of two ways from the primary database to the standby database: either by ARCH or LGWR.
1. when ARCH involves
2. when LGWR involves
FAL_Client = (Should i enter net service name or Db name or service_name
FAL_Server = Should i enter net service name or Db name or service_name )
FAL_CLIENT='whichone'
[code]...
I am creating database instance from template. I have specified the location of redo log files. When I run the dbca utility it does creates the redo log files in specified directory. But the installation fails . When I checked the trace file. it says unable to locate the specified file(redo.log). But when i check in directory they are created.
I am using windows 32 bit oracle 11g
What is the purpose of Standby Redo Log Files in Data Guard configuration? When it is utilized by the database?
View 4 Replies View RelatedI learned that Oracle uses supplemental logging mechanısm to add the changed rows to redo log files and identify the changed rows on target replication database? Is that mechanism mandatory to handle the replication of data between updated and back up databases?
View 1 Replies View RelatedI was asked by my systems administrator if I could tell him how much redo log volume, on average, do I figure we generate in a day?
Just wondering how I might calculate this?
We have several production databases. If I wanted to calculate the above for one of them, would it be take all the redo logs for a day and total up the size in bytes? Maybe take a 5 day work week and take the average over the 5 days?
As we know that, MV is generating more redo logs during the FAST refresh. but i need more clarifications on that.
see the below examples:
exec dbms_mview.REFRESH ( LIST => 'mv_test', method=>'F');
PL/SQL procedure successfully completed.
select a.name, b.value
from v$statname a, v$mystat b
where a.statistic# = b.statistic#
and a.name = 'redo size';
NAME VALUE
---------------------------------------------------------------- ----------
redo size 147144
see the redo size is 147144 bytes. Immediately, i refreshed in MV view. now there is no update or insert or delete stats happened in source tables. but i do see redo log generation is high for NO DATA refresh.
select a.name, b.value-147144
from v$statname a, v$mystat b
where a.statistic# = b.statistic#
and a.name = 'redo size';
NAME VALUE
---------------------------------------------------------------- ----------
redo size 42352
For no rows refresh, it takes 42352 bytes.. why oracle generated redo logs when there is no DML operations happened in source table.
What's the difference between a dirty buffer and a redo buffer?
My understanding is that a dirty buffer is a changed buffer or whenever data changes in the buffer cache, it's marked as dirty. Also, a redo buffer keeps track of changes that were made to the data, so it's also referring to changed data as well...DWBn writes dirty buffers to disk and LGWR writes redo data to redo log filesHow can we differentiate between the two?
In one of our envirnoment i could see the redo size is high.Trying to understand why this is more
View 18 Replies View RelatedI have oracle 9i running on HP-UX, I would like to find how much redo we are generating in a given period of time, is there any script that I can use to get this information?
View 3 Replies View RelatedI learnt that logWriter writes in the redo log files when redo log buffer is 1/3 full, it means that 66 % of redo log buffer are always empty and never used,
if no, isn't a waste of memory (66 % always empty !)
11.2.0.2.0
OEL.
Design stage of New SAN. I can put a lot of the database, including redo on SSD.
1. Hardware sub tiering enabled. Has anyone ever gauged performance with enabling 11g Smart flash cache using the SSD as the flash device even with the hardware subtiering on? ie, if the hardware subtiering is moving hotblocks to most performant disk, is there much significant benefit having the flash cache on. Im guessing yes as the flash cache is working at the SGA level.
2. To redo or not to redo on SSD. Many notes say not to so as to avoid log file sync waits. Is there a way to keep it on the SSD and avoid the waits? Is there any risk of enhanced degradation of the disks over time with having so much sequential writes from the redo if I leave it on there?
How to Minimise Waits for 'Log File Sync' [ID 857576.1] (discusses keeping redo off ssd but only generally)
[URL]
I'm an Oracle novice and from what I've read so far, it seems that you should be able to do rollbacks and data recovery using the redo logs. I'm having a difficulty understanding the need for the undo tablespace.
View 2 Replies View Relatedit seems that you should be able to do rollbacks and data recovery using the redo logs. I'm having a difficulty understanding the need for the undo tablespace.
View 3 Replies View RelatedThe REDO log file size is important DB performance issues when DB is run archivelog mode.If DB run noarchivelog mode, REDO log file size not impact to DB performance.
View 3 Replies View Related