When i open the form,select a radio button and immediately do a SHIFT+TAB form hangs.
After selecting the radio button if i do a TAB and then do shift+tab it works fine for me.
There is no KEY-PREV-ITEM trigger in radio group.For my testing i have also written go_item in this trigger,but still it fails.
I have some doubts about Radio buttons,
1) how to validate radio buttons in WHEN-RADIO-CHANGED?
2) how to disable a radio button?
3) how to disable a text item when a radio button is un-checked.
4) how to assign default value to radio button like(1,2,3...) or(A,B,CD,...)
I have one interface form where user will choose radio buttons and based on radio button value different report will run, in one radio button i want to check parameters , for example if there are three radio buttons, a - will run a.rdf ,b- will directly run b.rdf , if user chooses c - then prompt will appear asking him to input from date and to date and based on that value c.rdf will run.
I want this date parameters to run only for this report c.rdf only.One way is to display from date and to date on forms and make it applicable to only this report , but i want to use this parameters only while choose c radio button.
I have a form which contains some block (each block with some text item, two radio groups and a list item). I want to enable/disable and set visible property as true/false for first to last items of each block conditionally. I can do that for all items but radio buttons.
Because to set item or radio button property I need to pass that items ID or Name as parameter. I can get items name/type using get_block_property and next item of that item using get_item_property but unable to get radio button ID/Name using get_radio_button_property or any other built in. To execute get_radio_button_property or set_radio_button_property I need to pass radio button ID/Name. So, how I track radio button id or name in oracle forms? Is it limitations of Oracle forms?
I am working on forms 10g(version 10.1.2.0.2 ) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on windows 2000 platform. My requirement is to dynamically get the label of the radio button item in a radio group.I am able to get the label of the radio group as shown below
Item :Radio group
Label : Gender
IF m_type = 'RADIO GROUP' THEN
m_label:=Get_Item_Property(m_Item ,label);
END IF;
There two Radio buttons inside this radio group which are
item : Radio button
Label : Male
item :Radio button
Label :female
What is the code to get the label of radio button(i.e) male and female ?
How will I get the count of radio buttons in a radio group at runtime?
i have 2 radio button on my forms and values are A and B. But i have load data from script and against that radio button i have some other values loaded,
When i select query on those records those have other value then radio button, it show nothing. I want to catch that error but there is no error shows. it shows no record to be query. i just want to inform user that that record is not that value which is associated with radio.
i have field in DB that taken ( 1 or 2 or 3 ) am added it as text item at first and then change it to ( radio group ) contain 3 radio as :
value for first 1 = 1 , = 2 , = 3 and mapping = 1
initial value for the group = 1
but when am working with the form and commit form there is no data add in this field when am change the radio value by click on any other on ( 2 or 3 ) it's saved no problem in it ..
why this thing happen coz i need to set the first radio as default for the form .
Suppose There are Four options in a Radio Group. From this whichever option I select using the Mouse that option must be Inserted in the Database table field.
How to do this Using Radio Buttons.
Also If I want to select more than One Option Then I use Check Box. For this Also When I select two or three options simultaneously then these values must be Inserted in the Database Table Fields.
how can i get the chosen value in radio button into text item which is in another form?
Suppose i have 3 radio buttons (watch, gadget and jewelry)then I choose watch.How can i display that chosen radio button into the text item which is in another form?
i have a radio group(RG) in that group i have two radiobuttons: rb1 and rb2 on a datablock based on a view having display iems 8. i made only one visible i.e rb1. so there is 8 radio buttons displaying in that datablock and when i check one and then another, the previously checked is not unchecked by itself. i need to do when i checked on one then the previous one unchecked itself.
View 2 Replies View RelatedMy VNC Hangs after completing all the steps in dbca while installing 11.2.0.3.0 after giving finish button to install database.
Completed All software installation.
Red Hat version: Red Hat Enterprise Linux Server release 6.2 (Santiago)
Linux xxxxxxx.xxxxx.net 2.6.32-220.el6.x86_64 #1 SMP Wed Dec 7 10:41:06 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
i have used radio button under dynamic conditions for an interactive report.eg: radio button values are like a) front end b)middlware c)back end.so based on the selected value of the radio button, interactive report appears. and each fields in radio button have separate set of users. now my issue is,based on the user logging in, the default value should set up while the page is loaded...[i.e... if a front end user logs in, the default value of tat radio button shd be front end...]
View 5 Replies View RelatedAPEX 4.1 / 11g
Theme 21
I have a page with about 8 Classic reports. 4 of them percentage values, 4 totals. I have one RG with a Percentage or total option. When I select the percentage radio, it should hide all the total regions. When I select the totals radio it should hide all the percentage regions. Simple? So I thought. This is what I did.
1. Created a RG(P2_RG) -> Page value is redirect and set value.
2. STATIC:Percentage;P,Total;T
In the RG, I have created a normal DA which has the true and false events as follows.
Event -> Change
Items -> P2_RG
equal to -> P
In the true actions, I have hidden the 4 totals regions.
shown the 4 Percent regions.
In the false action, I have shown
hidden the 4 percent region
shown the 4 totals region.
The event specification for one these true actions is
Action -> Hide (If I am hiding)
Fire when event is ->True
Selection type -> region
Region -> The region I want to hide/show.
But it does not work! I tried to replicate the issue on apex, by using a small example but could not. Works fine in apex following the same process.
[URL]
I tried to debug by having a display item to show the value when I change the radio button. The values are changing properly. I tried actually, adding a condition filter in the region itself by using the "Value of item/column in expression1 = expression 2" where expression one I tried :P2_RG and expression 2 as P but that just hides the whole region.
I wanna disable shift+tab key function not to be able to go to previous item. What should I do?
View 1 Replies View Relatedi m trying to display a field when shift+f4 is pressed. but i don't know the trigger in which the code needs to be written.
View 8 Replies View RelatedI have a Radio Box Item field in Form, It contain Three Radio Buttons.
During the User Login Some of the users Not Require to Touch Any of the Three Radio. Thus i Require to Disable that Radio Button to That User. How to Disable the Particular Radio Button.
I'm facing a strange problem with one of my client.
Sometimes the application hangs when they are typing in text item defined with 2000 or 4000 char long.
The application needs to be close manually.
The first time we faced the problem, we tought it was due to database locks but the DBA confirmed that everything was OK.
The OAS admin also tried to log the application but nothing special. So we tried to run the application using JRE instead of JINITIATOR and the problem disappeared.
So, my question is, is there known bug about using large text item in Forms 10G? and especially with JInitiator? I tried to find informations on metalink but found nothing.
i have 2 files rep.rdf and rep.fmb
i made parameters for userid and dept its working fine but
how can i make order by parameter using radio buttons
what i add in report and form ?
For passing my apprenticeship I am developing part of an application to change the language of the application dynamically.
My first idea looks like this:
In each form I add a package that works like this:
block := first block
loop
..item := first item
..loop
....set item label or prompt to new language
....exit when item = last item
....item := next item
..end loop
..exit when block = last block
..block := next block
end loop
That far everything is fine. With the get_form_property I can access the first and last block and always get the next block with the get_block_property. Same is true for the items by get_block_property for the first and last item and the get_item_property for the next item. By this way I can dynamically chance all item prompts and labels without knowing the name or the number of blocks and items. But what about radio groups? Is there any possibility (and if yes, which?) to get the first, last and next radio button of a radio group in the same way?
i want to get the x-pos of item at the radio-change trigger but it return the error
declare
x_pos number;
lnum_x_pos number;
lnum_width number;
begin
if :radio_group = 'E' then
lnum_x_pos := Get_item_property('Remarks',x_pos);
Message('Position of x...'||lnum_x_pos);
lnum_width := get_item_property('Remarks',width);
Message('width of remarks field..'||lnum_width);
else
set_item_property('remarks',enabled,property_true);
set_item_property('remarks',visible,property_true);
end if;
end;
error is:::
argument to built in get_item_property/field char can not be null?
I have a query form where I am attempting to add radio buttons for the user to specify if they want to see Active, Expired, or Both vendors. The existing form is a multirow database block and a single-row detail database block. Users query in the multirow block. I created a QRY_CONTROL non-database block with the radio group and a couple other variables. When they select a radio button, the WHEN-RADIO-CHANGED changes the default block's where clause.
My problem is that the radio buttons cannot be changed in ENTER-QUERY mode. If they cancel the query, the buttons work as expected. I put in a couple messages and the trigger isn't even firing, so I ruled out a code problem I think.I checked to make sure that the group properties are Enabled=true, mouse_navigable=true, query_allowed=true.
I'm having a multi-record detail block in my form and after querying the form, when I scroll through the scroll bar, it is hanging (freezing) just before reaching the last record.
I have noticed that it never hangs if I use arrow keys to scroll between the records. It only hangs when I use scroll bar or page down key.
Regardless of the number of records fetched, it only hangs when I click the scroll bar (or press page down key) to fetch the last record.
It happens to all my custom forms and I'm developing this for Oracle EBS Apps 11.5.10.2. Oracle JInitiator Version is 1.3.1.21 and my form builder is Forms 6.0.8.28.0.
Im trying to install Weblogic/Forms on a Windows 7 x86 machine. Its for the developers to use.But when I run the config.bat and is creating the domain and installing Forms builder and the other stuff the installation hangs at: step restaring admin server started.
Log:
Stopping Derby Server...
Starting AdminServer
Starting the domain ...
DEBUG : Loading the 32 bit dll here
DEBUG : Loading DLL : D:/oracle/middleware/as_1/install/config/StartUtil.dll
DEBUG : Loaded DLL : D:/oracle/middleware/as_1/install/config/StartUtil.dll
I'm trying to figure out, based on total scheduled shift time and scheduled breaks what the effective schedule time is by hour for a particular employee.
So I have a shift query that gives me this (using a cross-day shift here because they do happen-not sure if that will impact things):
Shift ID EmployeeID ShiftStart ShiftEnd
123 99 04/10/2013 21:00:00 04/11/2013 06:00:00
And I have a activity query that gives me
Shift ID EmployeeID ActivityStart ActivityEnd Type
123 99 04/10/2013 23:00:00 04/10/2013 23:15:00 Break
123 99 04/11/2013 02:00:00 04/11/2013 03:00:00 Lunch
123 99 04/11/2013 04:00:00 04/11/2013 04:15:00 Break
And I need a query that give me this:
Shift ID EmployeeID ShiftStart Hour Net_Scheduled_Time(min)
123 99 04/10/2013 21:00:00 04/10/2013 21:00:00 60
123 99 04/10/2013 21:00:00 04/10/2013 22:00:00 60
123 99 04/10/2013 21:00:00 04/10/2013 23:00:00 45
123 99 04/10/2013 21:00:00 04/11/2013 00:00:00 60
123 99 04/10/2013 21:00:00 04/11/2013 01:00:00 60
[Code]...
Is there a relatively easy way to get there in one query, no temp tables?
I wanted to create shift rota for the employees as per the below conditions.
1). Shift should be rotated.(it should check previous 2 shifts and assign to another shift).
2). The same employees should not be allocated for the next shift .
Ex : Now jones, jekku, henry and villiams are in "C" shift . So the same employees should not be allocated to the next shift, it should be random. Some of these employees should be allocated to "B" and some employees should allocated to "A" shift....
Below are the SQL statements to create the table and input the data..
create table resource_details
(empno number(5) ,
ename varchar2(30),
shift char(1));
alter table resource_details add constraint res_pk primary key(empno) ;
insert into resource_details values(51370 , 'Finney' , 'A') ;
insert into resource_details values(51371, 'Jerry' , 'B') ;
insert into resource_details values(51372, 'Jones' , 'C') ;
insert into resource_details values(51373, 'Smith' , 'A') ;
insert into resource_details values(51374, 'Krishna' , 'B') ;
insert into resource_details values(51375,'Chenna','A');
[code]....
I have tried with employee number to check which shift he is/was in & assigned the shift accordingly , but here shift is getting rotated but not employees(same employees are going to the next shift, which should not be accepted..)
I have a 10G Express system running. I Have 2 tablespaces in production. WHen taking backup, it terminates unsuccessfully saying system01.dbf is damaged. The application works fine and no data loss is found through the application interface.
So can I shift the data to a new server using the dbf files of the tablespaces in use?
i want do add a image as a button.i added iconic image on a button from desktop,but its not working during runtime,i only see a flat button instead of iconic..what should i do...??
View 2 Replies View RelatedI hava LOV and i want process events when click button Cancle on LOV then disable a canvas, but i don't know how process it.where could know events click mouse in button Cancle on LOV - Oracle Forms?
View 9 Replies View RelatedIs it possible to add some custom image on a button?
If so, How to do it?
I try to apply update statement on the button for the specific records, the command does executes if in the end i write execute_query it always asks for do u wanna save the records, yes or no. I want to remove that message. Also if i write commit it does remove that message but everytime i press the button it updates the old record fine but also adds one more entry for the same record.
View 5 Replies View Related