How can I exclude during the import (with impdp) all tables of a certain type, es. statistics?I tried with .... STATISTICS=NONE, but this command seem ignored during the import,
View 6 RepliesI am using Oracle 10g Data Pump Export utility expdp. What I am trying to do is to export a single schema, except for a certain partition P in table T.
I have tried:
expdp user/pass@db dumpfile=... logfile=... exclude=table:" = 'T:P' "
It doesn't work. The whole table T gets exported.
Is there a way to exclude partitions from schema mode export?
If not, is there a way I can achieve the same with DBMS_DATAPUMP API?
aix 6.111.2.0.3 I have an expdp dump from prod to be imported to our test database.I have imported it using impdp, but to my surprise the tables were imported but lots of indexes were not created? even If I have used TRANSFORM=SEGMENT_ATTRIBUTES:N just to use the default USERS tablespace. How do I import the indexes separately, skipping the tables and other objects?
View 14 Replies View RelatedI've got a schema that I've truncated all tables. I have a full schema export I took awhile back, and I'm wanting to import this into the schema to basically 'reset' it.
First time run, I got the :
ORA-39151: Table "xyz.tablename" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
I've been reading through, and see suggestions to add to the par file:
CONTENT=DATA_ONLY TABLE_EXISTS_ACTION=APPEND
And I've seen others use the option for:
table_exists_action=replace
I basically want to put the data back into the tables, and have the indexes rebuilt.....
the following situation, I have a directory named /dat/global/stock/ inside this i will get files named differently for example below.abcdef.112dfgrt.2......
Here i want to load this file one by one into the external tables and generate one more file based on some enrichment.
Step 1. Have to take first file and to load into the ext table.
Step 2. Enrichment
Step 3.File generation.
Now here i am facing a problem that in that particular directory i usually get 1000 files so i need to get file one by one and to put in one more directory. how can i get file one by one and generate file by using oracle loader
export a subset of the data only from one database to another. Both on AIX.
Source/testdatabase 11.2.0.3 (non-partitioned tables)
Target productiion database 11.2.0.3 (partioned tables)
Tables same column names but diffrenet index structures and traget one to be partitioned hence only want to import the content Each table on source datbaase hascolumn seq number and only want to extract the last few months of data.
TABLES:table1,table2...
DUMPFILE=dump_dir
CONTENT=data_only
QUERY= table1:"WHERE seq_num >100 "want to use expdp but not sure about how to ensure all tables have the WHERE seq_num >100 condition, if leave table1: out and just have
QUERY= "WHERE seq_num >100 " will this condition be applied to all tables which is what we want.
I'm assuming also can use impdp CONTENT=data_only?
1) Is there a way to skip database jobs while exporting (EXPDP) ?
2) Is there a way to skip database jobs while importing (IMPDP) ?
Why do export-import require temporary tablespace? Since export-import do behave like DMLs, when does temporary tablespace be needed by datapump utility?
View 2 Replies View RelatedI have a flat file (student.dat delimiter %~| ) using control file (student.ctl) through sql loader. Here are the details.
student.dat
student_id, student_firstname, gender, student_lastName, student_newId
101%~|abc%~|F %~|xyz%~|110%~|
Corresponding table
Student (
Student_ID,
Student_FN,
Gender,
Student_LN
)
How do i map student_newId field to student_id field in STUDENT DB table so that new id should be inserted in student_id column. How do i specify the mapping in control file. I dont want to create a new column in student table. In control file i will specify the below, Is this a best approach?. Do we have any othe way?
STUDENT_ID *(:STUDENT_NEWID)*,
STUDENT_FN,
GENDER,
STUDENT_LNAME,
STUDENT_NEWID BOUNDFILLER
MY DB Version: 10.2.o
OS: Windows Server 2003
I am trying to import on table which i have the export dump file which i take using expdp previously when i load that table on the same host
by using below command:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
after that i zip that dump and move it to external usb and now i need that table i copy that table and unzip that that dump
Command i am using to do the import is :
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
But the query of import is still runing even not showing any amount of rows to be imported.
i already make the tablespace in which the table was previosuly before dropping but when i check the sapce of tablespace that is also not consuming one error i got preiviously while performing this task is:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "CDR"."SYS_IMPORT_TABLE_03" successfully loaded/unloaded
Starting "CDR"."SYS_IMPORT_TABLE_03": cdr/********@tsiindia directory=TEST_DIR dumpfile=CAT_IN_DATA_042012.DMP tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log
[code]....
i check streams_pool_size it will show zero and then i make it to 48M and after that
SQL> show parameter streams_pool_size;
NAME TYPE VALUE
-----------
streams_pool_size big integer 48M
But still it takes time
My database version
SQL> select * from v$version;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - ProductionOS version:
Windows 7 64bit I have schema(scott) export with schema level option and imported with different name as (scott1).At regular period of time i need to import the scott to scott1 without affecting existing records.such as
*1. Need to append new created records.*
*2. Need to append updated records.*
for the above requirement I did in the following way
expdp xxxx/******** schemas=SCOTT directory=dumpdir dumpfile=SCOTT_28-SEP-2012.dmp logfile=exp_SCOTT_28-SEP-2012.log imported in the following way impdp xxxx/******** AS SYSDBA REMAP_SCHEMA=SCOTT:SCOTT1 directory=DUMPDIR dumpfile=SCOTT_28-SEP-2012.dmp logfile=imp_SCOTT2_28-09-2012.log TRANSFORM=SEGMENT_ATTRIBUTES:n TABLE_EXISTS_ACTION=APPEND.
The problem is i couldn'table to append the records to existing tables the log error show such ways.
ORA-31684: Object type USER:"SCOTT1" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
[code].....
I am trying to run impdp over network to import tables only but i am getting an error saying not able to create metadata and the import fails
Here are the steps below,
1. Source database created a user and granted select on certain tables to the user.
2. Created a user in the Target database.
3. Created a public link as sys user in the target database.
4. granted imp and exp full database to both users and all the other privs.
5. Started the impdp from the target server.
The import fails with
$impdp abc/xyz directory=DATA_PUMP_DIR network_link=TESTAR logfile=net_import_proddev.log TABLES=impdb.abc parallel=12 REMAP_SCHEMA=IMPDB:ABC
Import: Release 11.2.0.3.0 - Production on Tue Apr 23 13:10:51 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "IMPDB"."SYS_IMPORT_TABLE_01": abc/******** directory=DATA_PUMP_DIR network_link=TESTAR logfile=net_import_proddev.log TABLES=impdb.abc parallel=12 REMAP_SCHEMA=IMPDB:ABC
[code]....
How to import data from excel(.xls) file to data base table
I have excel sheet(.xls) data details, I neet to upload details to data base table using procedure
excel sheet is not CSV file, so SQL Loader is not using
any alternative solution for this issue
I am using expdp command to export the table by specifying Query parameter. But i am unable to export the table based on the condition.
Ex:EXPDP username/password dumpfile=employee.dmp logfile=emp.log directory=DATADIR_EXP TABLES=EMPLOYEE query=EMPLOYEE:"UPDATED_TIME >= '04-JUN-13' AND UPDATED_TIME >= '05-AUG-13'" Estimate in progress using BLOCKS method...Processing object type TABLE_ EXPORT/ TABLE/ TABLE_ DATATotal estimation using BLOCKS method: 3 GBORA-31693: Table data object "<username>"."EMPLOYEE" failed to load/unload and is being skipped due to error:ORA-00933: SQL command not properly endedMaster table "<username>"."EMPLOYEE" successfully loaded/unloaded...Dump file set for <username>.SYS_EXPORT_TABLE_01 is: E:IMPDPemployee.dmpJob "<username>"."SYS_EXPORT_TABLE_01" completed with 1 error(s) at 12:34:45 Oracle 11g,
I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
OS : SOLARIS SPARC
ORACLE - 10G
Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
Below Script i am using
===============
exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query="WHERE E3RECV_DT LIKE '201305\%'" log=PGTB_IFDATA_conditional.log
I had just successfully finished a full importing from Oracle 9i DB to Oracle 11gR2 DB. My export was a full db export.
Prior to this importing, my 11g was a newly created DB with the default SYS, System etc.. schema. Their passwords is different from those in 9i.
However, i realised that after importing... their passwords in 11g was replaced by those passwords in 9i, including SYS and SYSTEM user...
I want to import data in a csv file by SQL Loader.
but , I don't want to import some illegal rows when the column 'name' is null
how can I modify the SQL Loader ctrl file?
I try to transfer data from one database to another one through data pump via SQL Developer (data amount is quite important) exporting several tables. Tables export is doing fine, but I encounter the following error when I import the file (I try data only and data + DDL).
"Exception: ORA-39001: argument value invalid dbms_datapump.get_status(64...=
ORA-39001: argument value invalid
ORA-39000: ....
ORA-31619: ...
The file is in the right place, data pump folder of the new database. User is the same on both base, database version are similar.
I have schema level export for user SAMPLE1(Default tablespace USERS) on oracle 9.2.0.1 production database. I want to import into another 9i database on another server, so do i nneed to Create SAMPLE1 user and USERS tablespace in new database again.
View 5 Replies View Relatedlet us consider mytest schema is having 6 tables
tname tabtype
myt table
myaxpertlog table
abb table
ccc table
ddd table
xxx table
now from this schema i want full dump and also from myaxpertlog table i required metadata only not records.
c:> export mytest/log file=20130409mytest0904pm.dmp tables=(myaxpertlog) rows=n
if i tried i am get only one table but it does have records.
I have one prod server (11.1.0.6.0) servers on Windows 2003 R2 64 bit.
Server Name (PRODDB)
I do not have access to that prod server , i want to take one export data pump from my client machine and due to space issue in prod server , i want to keep dump file in my client machine itself. i can take traditional export and keep the dump file in my client machine but i do not know how to achieve the same via data pump ...
How to generate dump file in client machine itself via data pump ?
export data program "ociuldr" can not run in 64bits win2008 environment. Where can i download 64 bit version of "ociuldr" program. I have read some article . The article mention that the export data program ociuldr.exe need to recompile into 64 bits version. Finally I also want to ask the import data program sql loader "sqlldr.exe". Can it run in 64 bits environment. Where can i downlaod 64 bits version of "sqlldr" program.
View 1 Replies View RelatedI am trying to migrate a table to a new table that has the field sequence changed and also has a new field added. My main question is if it is possible to have datapump add values to the new field in the target table.For example:
-original table has fields a, b, d, c
-new table has fields b, c, d, a, e
I want to load the new table and also include adding values for field e. In this case, field e is a year field, so it should be loaded with '2012'..Does datapump have the ability to do this? Is reorganizing the fields going to cause me any problems? We are on oracle version 11.2.0.3
When I do the import the of succeeding dump, I drop the existing schema "SQL> drop user username cascade;" and import dump by " impdp system .... ". I would like to import a dump to an existing instance but only data import and will leave the current packages and other metadata untouched and unchanged on the said existing instance.
1. Do i need to drop user before the import if my requirements are the above?
2. If i need to drop user, what should be script.
3. For the import itself, what parameter should i use?
4. What are the necessaries I need to consider before doing the import.
version:11.2.0.3
Platform : RHEL 5.4
Imagine you have 100 schemas backed up (expdp) in a dumpfile and you want to import just one schema from that dumpfile in a DB. You can specify just that one schema you want using SCHEMAS parameter in the impdp. But things are not straightforward when you want use REMAP_SCHEMA.
Here is my scenario:
===================
I took the expdp dump of schemas A and B in one go. So, dumpfile has objects from both A and B.The dumpfile name is : schemas_AandB.dmpNow , I want to create schema C from A using REMAP_SCHEMA parameter
-- Putting each parameter in a separate line for readability
impdp PSTREF/PSTREF_123
DIRECTORY=ADET_EFX_DIR
DUMPFILE=schemas_AandB.dmp
LOGFILE=CreatingCfromA-Impdp.log
REMAP_SCHEMA=A:CEverything goes fine. Schema C is created from Schema A in the dumpfile.
But impdp is trying to create schema B as well because schema B was present in the dumpfile. Since the schema B and its objects are already in the DB , I get the following errors.
ORA-31684: Object type USER:"B" already exists
ORA-31684: Object type PROCEDURE:"B"."SP_CLEAREXPIREDSESSIONDATA" already exists
ORA-31684: Object type PROCEDURE:"B"."SP_DELETESESSIONDATA" already exists
ORA-31684: Object type PROCEDURE:"B"."SP_DELETESTATECONTEXTINFO" already exists
[code]...
Trying to avoid schema B in the dumpfile from being imported by specifying SCHEMASBut I got the following error
ORA-39065: unexpected master process exception in MAIN
ORA-12801: error signaled in parallel query server PZ99, instance oracth214:HEWRAC1 (1)
ORA-01460: unimplemented or unreasonable conversion requestedMaybe REMAP_SCHEMA and SCHEMAS parameters won't work together.
Is there any way to prevent the impdp from importing user B and its objects ?
I want to export a table ( using exp or expdp ) from client machine. Dump file should be created to client machine.
Is this possible ? How to do this ?
I have a question related to Oracle Data Pump.
So, I want to export two schemas from database with condition:
1. I want to export scheme_1 with all metadata objects + data.
2. I want to export scheme_2 with only metadata objects.
Oracle version is Oracle EE 10.2.0.4.0, OS - Microsoft Server 2003R2.
As far as I know I can not use parameter EXCLUDE like:
EXCLUDE =TABLES:" IN ('SCHEMA_NAME.TABLE')"
(-but this parameter will give me no tables at all) or I can not use CONTENT=SCHEMA_NAME.METADATA_ONLY, maybe I can use QUERY=where table in (select tablename where schema is .... - but I have tables with same name in both schemas).
We need to export a big table into a text file with Column delimiter '&|' and row delimiter '$#'.
DB Version is 10.2.0.2, the table size is around 4 GB.
I have taken expdp dump from 11g database running in Development env.Now i want to import this dump into 10g database running in QA env.
while taking export from 11g database i used this script and backup was sucesssful
expdp system TABLES=sss_exp_test.EXP_SB_HEADER_TMP VERSION=10.2 DIRECTORY=RMSDEV_IMP_DIR DUMPFILE=EXP_SB_HEADER_TMP.dmp LOGFILE=EXP_SB_HEADER_TMP_expdp.log
When i trying to import this dump in 10g getting error.
impdp system TABLES=sss_exp.EXP_SB_HEADER_TMP DIRECTORY=RMS_DATA_PUMP DUMPFILE=EXP_SB_HEADER_TMP.dmp LOGFILE=EXP_SB_HEADER_TMP_impdp.log
Import: Release 10.2.0.5.0 - 64bit Production on Sunday, 14 October, 2012 19:58:53
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39040: Schema expression "SCHEMAS" must identify exactly one schema.
I received dmp file , and i want to import only data from that file ?
How can we achieve that in oracle Oracle 11.2.0.3