Backup & Recovery :: Set Recovery Window To 0 Day?
Dec 24, 2011If i set the recovery window to 0 day,what does it effect?
configure retention policy to recovery window of 0 days;
ADVERTISEMENT
Backup & Recovery :: RMAN Backup Deleted Even Within Recovery Window
Oct 18, 2011I have problem on using "delete obsolete" in RMAN.
First, let describe my backup configuration.
1. Full backup every Monday (17-Oct, 10-Oct, 3-Oct, 26-Sep)
2. Incremental backup for other days
3. Enable autobackup of control file
4. Backup archive log every day
5. RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS
6. Execute "Delete obsolete" every day
7. control file is used instead of catalog
The results observed:
1. Backup of control files older than 30 days will be deleted
2. Backup of archive log files older than 30 days will be deleted.
3. Backup of datafiles older than ~14 days but before 30 days are also DELETED.
In my example, the backup of datafiles created at 26-Sep is deleted at 16-Oct.
I tried "restore database validate until time "sysdate-22"" at 17-Oct. And RMAN reported "datafile xx will be created automatically during restore operation". It seems that RMAN failed to do restoration up to 22 days ago. The retention policy I set seems not effective on datafile backups.
I checked view v$backup_set and the "Keep" is "No" and "Keep until" is empty.
The only thing I can think of, is the settings of "CONTROL_FILE_RECORD_KEEP_TIME". It is marked "7" in the Oracle, which is less than the retention. But I suppose this only causes the backup not deleted, but NOT be deleted earlier.
Backup & Recovery :: RMAN Recovery Failing With Incremental Level 0 Backup
Feb 10, 2011We are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
Backup & Recovery :: ORA-16004 / Backup Database Requires Recovery
Oct 20, 2011Here is the details
[oracle@localhost dbs]$ export ORACLE_SID=stby
[oracle@localhost dbs]$ sqlplus '/as sysdba'
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Oct 20 09:47:34 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> !
[oracle@localhost dbs]$ pwd
/oraeng/app/oracle/product/10.2.0/dbs
[oracle@localhost dbs]$ exit
exit
[code].....
Backup & Recovery :: ORA-01139 / RESETLOGS Option Only Valid After Incomplete Database Recovery
Jan 25, 2011SQL> alter database mount;
Database altered.
SQL> alter database open resetlogs;
alter database open resetlogs
*
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
Backup & Recovery :: RMAN Restore / Recovery To Previous Cold Backups
Aug 13, 2013My scenario is: database is in archivelog mode.
I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.
I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database
( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)
Next tried to :
recover database archivelog tag 'DLYTUE'
( same outcome )
What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..
I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.
Backup & Recovery :: ORA-00265 / Instance Recovery Required - Cannot Set ARCHIVELOG Mode
May 28, 2008I need to make my database to ARCHIVELOG mode when i try it it gives below following error
SQL> alter database archivelog;
alter database archivelog
*
ERROR at line 1:
ORA-00265: instance recovery required, cannot set ARCHIVELOG mode
Backup & Recovery :: Initialization Of Internal Recovery Manager Package Failed
Sep 28, 2011I have a database in Archivelog mode and Flashback mode. I am trying to connect to RMAN. But am getting the error
SQL> select name,log_mode,flashback_on from v$database
2 /
NAME LOG_MODE FLA
--------- ------------ ---
ORCL ARCHIVELOG YES
SQL> show user
USER is "SYS"
SQL> host rman target /
[code]....
Backup & Recovery :: Cannot Update Recovery Area Reclaimable File List
Oct 18, 2012I just switched my STBDY DB to a PRIMARY DB and I am ran the following:
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
using target database control file instead of recovery catalog
old RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
new RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
new RMAN configuration parameters are successfully stored
ORA-00245: control file backup operation failed
RMAN-08132: WARNING: cannot update recovery area reclaimable file list
RMAN> show all;
RMAN configuration parameters for database with db_unique_name ORARZULB are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[code]....
what causes this warning and how to get rid of it?
Backup & Recovery :: RMAN-00554 - Initialization Of Internal Recovery Manager Package Failed?
Feb 11, 2011I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.
oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB
Recovery Manager: Release 9.2.0.4.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
Backup & Recovery :: RMAN-00554 - Initialization Of Internal Recovery Manager Package Failed
Jun 25, 2013While connecting to target database from stand database. I am getting below error.
calhost dbs]$ sqlplus system/oracle@proddb
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
Recovery Manager (RMAN) :: Backup-Based Duplication Without A Target And A Recovery Catalog Connection?
Sep 30, 2012how to duplicate it on oracle 11g xe windows 2003
i have read from documentation but getting some error.
in last
E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe
[code]...
Backup-Based Duplication Without a Target and a Recovery Catalog Connection?
Backup & Recovery :: Incomplete Recovery Shows RMAN-20207
Jan 4, 2012when i performed incomplete recovery i try to set until time but it shows RMAN-20207:until time or recovery window shoubld be before resetlogs.
View 3 Replies View RelatedBackup & Recovery :: Recovery Of Database From Crashed Host Server?
Jul 20, 2012Backgroud info:
host server crashed.
Database was not cleanly shutdown.
Database is not in archivelog mode.
Datafiles were saved.
My goal:I want to recover the database based on the available files.
My approach:
Install new database.
ALTER DATABASE BACKUP CONTROLFILE TO TRACE.
shutdown database.
Place available dbf files in the location for new database, replacing existing files.
edit trace file to create new controlfile. Script is:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "newdatabase" RESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
[code]....
Backup & Recovery :: Oracle11gR2 Not Allow To Open Database After Complete Recovery?
Feb 24, 2012My database is in NOARCHIVELOG mode.I took whole DB backup ( cold).Then just after half an hour I ran following script.
RMAN> RUN { RESTORE DATABASE;RECOVER DATABASE;alter database open;}
Starting restore at 24-FEB-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=133 device type=DISK
channel ORA_DISK_1: starting datafile backup set restore
[code]...
Starting recover at 24-FEB-12
using channel ORA_DISK_1
starting media recovery archived log for thread 1 with sequence 2 is already on disk as file /u01/app/oracle/oradata/PROD/redo02.log
archived log file name=/u01/app/oracle/oradata/PROD/redo02.log thread=1 sequence=2
media recovery complete, elapsed time: 00:00:01
[code]...
Why do I need to specify an option at the first place?As my redo is intact, it is not incomplete recovery and, I do not want to generate new incarnation of my database.Why oracle simply not opening my database?
Backup & Recovery :: RMAN-06428 / Recovery Catalog Is Not Installed
Jan 1, 2012REGISTER DATABASE;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 01/01/2012 11:02:40
RMAN-06428: recovery catalog is not installed
Backup & Recovery :: Finding Rman Restore And Recovery Process?
Feb 7, 2011I have a doubt regarding the process the RMAN follows for restore and recovery of the database.
My Level 0 full backup completes on Saturdays at around 11 am after taking 8 hours (It starts at 3am).On Sunday, I ask RMAN to restore (on a different box) till Saturday 11:30 am.Then, after the restore is successful, I recover it till 11:45 am.
The recovery also goes fine and Iam able to clone to test box.
Till what time is the database restored? I assume its till 11 am since the L0 backup finishes at 11 am though I have asked it to restore till 11:30 am
During the recovery, ONLY the archives generated between Saturday 3 am and till the time i asked for recovery (Saturday 11:45 am ) are required. But, checking the recovery log file, i was surprised to see that RMAN has restored archive files starting from Friday 9:30 pm (Much before the time the Level 0 backup even started).
why does RMAN require the old archive log files.
Backup & Recovery :: ORA-00283 - Recovery Session Canceled Due To Errors
Dec 1, 2011I have problem when i am trying to recover database
i am getting above error.
Backup & Recovery :: ORA-19809 / Limit Exceeded For Recovery Files
Mar 22, 2012while opening my database i got this error i already increase my db_recovery_file_dest_size but still i got this error
E:oracleproduct10.2.0db_1BIN>SET ORACLE_SID=LIVEDB
E:oracleproduct10.2.0db_1BIN>SQLPLUS
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Mar 22 11:14:47 2012
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Enter user-name: SYS AS SYSDBA
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[code].....
Backup & Recovery :: Database Recovery With Missing One Of The Archivelog
Feb 10, 2011I want to do the recovery of my database using the archive log files but one of the archive log in between is missing,
View 17 Replies View RelatedBackup & Recovery :: ORA-19573 / Flashing During RMAN Recovery
May 5, 2011I was trying to backup my database via RMAN and I had deleted a datafile from the database while it was still in open mode.Since I can't return back to mount stage again,I tried to bring the tablespace pertaining to that datafile offline and then restore backup of the tablespace but it's falshing error during recovery.
When I try to restore entire database,it is not even able to restore.
Backup & Recovery :: ORA-01194 / File 1 Needs More Recovery To Be Consistent
May 16, 2012I am trying to open the database bur gettinf following errors
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'C:ORACLEPRODUCT10.2.0ORADATAORCLSYSTEM01.DBF'
SQL> shutdown
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 289406976 bytes
[code]....
Backup & Recovery :: RAC - RMAN Restore And Recovery To New Hosts?
Mar 13, 20121. My RAC (old RAC) had got a failures from one node, then there was only one existing node now.
2. I configured a RAC (new RAC) on 2 other servers, both of them (old-RAC and new-RAC) has got same OS version, platform and Oracle version release.
3. I took a full backup yesterday plus archivelog in the node of old-Rac, configure NFS in new-Rac to make the backup within remote-share NFS.
The only problem still now that I've restore/recovery/duplicated single instance, not Rac. So, may you guide me to do it?
Information:
Old-Rac & New-Rac:
+ Cluster 11g: CFS
+ Database: 2 nodes with same instance name (cbs1-cbs2)
+ Location for CRS_HOME and ORACLE_HOME: Same to be.
+ Location of archivelog: Same to be (+ARCHIVE)
Backup & Recovery :: ORA-01113 - File 5 Needs Media Recovery
May 11, 2012I am trying to move my data files from one location to other as i ran out of space.
SQL> alter database rename file 'C:oracleproduct10.2.0oradataSPF433SPF433ADW_DATA.DBF' to 'D:OracleDatafilesSPF433SPF433ADW_DATA.DBF';
Database Altered
SQL> alter database rename file 'C:oracleproduct10.2.0oradataSPF433SPF433ADW_DATATEMP.DBF' to 'D:OracleDatafilesSPF433SPF433ADW_DATATEMP.DBF'
Database Altered
Now when i am trying to run Alter Database open I get ORA-01113: file 5 needs media recovery error
Recovery Manager (RMAN) :: Schema Recovery Using Backup?
May 2, 2013Is this possible to recover a schema using RMAN bckup
View 5 Replies View RelatedBackup & Recovery :: Restore Time Based Recovery
Apr 28, 2011How can i take a cancel based recovery and time based recovery using rman. ?
View 3 Replies View RelatedBackup & Recovery :: Flash Recovery Area 9i
May 22, 2011I want to change backup location for Oracle 9i Database. there is no flash recovery area in 9i, so i want the parameter which i can use to modify backup location to anywhere i want.
View 4 Replies View RelatedFull And Incremental RECOVERY WINDOW
Sep 5, 2010I have RMAN configured TO RECOVERY WINDOW OF 7 DAYS;I do a Level 0 backup on SAT, SUN-FRI I do a Level 1 (all to disk)
After I do a successful Level 0 backup, why would I need to keep Level 1 backups around on disk?I know the recovery window is 7 days but is there any way to remove the other 6 days of Level 1 backups after a successful Level 0?To me this seems like a waste of space since I have a succesful Level 0 or am I missing something?
Backup & Recovery :: Recovery From 11.2.0.3 PSU2 RAC To Non-RAC
Nov 13, 2012I have a 2 node 11.2.03 (PSU2) RAC database running on solaris and I want to restore and recover the RMAN backup into a different server which is 11.2.0.3 stand alone database. Do I have to have this stand alone database also in the same patch set level (PSU2)? or I should be able to restore the RMAN backup without applying PSU2?
View 1 Replies View RelatedBackup & Recovery :: 10g Recovery On A Different Server
Feb 29, 2012I have a database ORADB1 running on UNIX server and I took a hot backup using a script and restored it on the same server as ORADB2 and opened the database to verify it comes up and then shut it down.
Now I have a requirement that I need to use the same datafile copy (ORADB2) and bring it up in another server as ORADB1 .